High strength kiloampere Bi2Sr2CaCu2Oxcables for high-field magnet applications
Authors:
Open Access
- 17 April 2015
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 28 (6)
Abstract
Multifilamentary Ag-sheathed Bi 2 Sr 2 CaCu 2 O x (Bi-2212) wire can carry sufficient critical current density J c for the development of powerful superconducting magnets. However, the range of its applications is limited by the low mechanical strength of the Ag/Bi-2212 strand. A potential solution is to cable Ag/Bi-2212 wire with high-strength materials that are compatible with the Bi-2212 heat treatment in an oxygen atmosphere. Past attempts have not always been successful, because the high-strength materials reacted with Bi-2212 wires, significantly reducing their J c . We examined the nature of reactions occurring when Ag/Bi-2212 wires are heat-treated in direct contact with several commonly used high-strength alloys and a new Fe-Cr-Al alloy. INCONEL X750 and INCONEL 600 resulted in significant J c loss, whereas Ni80-Cr caused little or no J c loss; however, all of them formed chromium oxide that subsequently reacted with silver, creating cracks in the silver sheath. We found that Fe-Cr-Al did not show significant reactions with Ag/Bi-2212 strands. Scanning electron microscopy (SEM) and energy dispersive x-ray (EDS) examinations revealed that the Fe-Cr-Al alloy benefits from the formation of a uniform, crack-free, continuous alumina layer on its surface that does not react with Ag and that helps minimize the Cu loss found with INCONEL X750 and INCONEL 600. We fabricated prototype 6-around-1 cables with six Bi-2212 strands twisted and transposed around an Fe-Cr-Al alloy core coated with TiO 2 . After standard 1 bar melt processing, the cable retained 100% of the total current-carrying capability of its strands, and, after a 10 bar overpressure processing, the cable reached a total current of 1025 A at 4.2 K and 10 T. Tensile tests showed that Fe-Cr-Al becomes brittle after being cooled to 4.2 K, whereas INCONEL X750 remains ductile and retains a modulus of 183 GPa. We proposed new cable designs that take advantage of the chemical compatibility of Fe-Cr-Al and high strength of INCONEL X750 for various high-field magnet applications.Keywords
Funding Information
- U.S. National Science Foundation Division of Materials (NSF/DMR-1157490)
- U.S. Department of Energy (DE-AC02-07CH11359, DE-SC0010421)
- FY12 Early Career Award from the US DOE (KA2501012)
This publication has 24 references indexed in Scilit:
- Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 TNature Materials, 2014
- Reversible effect of strain on transport critical current in Bi2Sr2CaCu2O8 +xsuperconducting wires: a modified descriptive strain modelSuperconductor Science and Technology, 2011
- BSCCO-2212 Wire and Cable StudiesIEEE Transactions on Applied Superconductivity, 2011
- High Field Magnets With HTS ConductorsIEEE Transactions on Applied Superconductivity, 2010
- High Field Superconducting Solenoids Via High Temperature SuperconductorsIEEE Transactions on Applied Superconductivity, 2008
- Development of Wind-and-React Bi-2212 Accelerator Magnet TechnologyIEEE Transactions on Applied Superconductivity, 2008
- Development of Round Multifilament Bi-2212/Ag Wires for High Field Magnet ApplicationsIEEE Transactions on Applied Superconductivity, 2005
- 12 kA HTS Rutherford CableIEEE Transactions on Applied Superconductivity, 2004
- Superconducting Magnets Above 20 TeslaPhysics Today, 2002
- Improvement of superconducting properties of Bi-2212 round wire and primary test results of large capacity Rutherford cableIEEE Transactions on Applied Superconductivity, 2001