Effects of a Rotating Cone on the Mixed Convection in a Double Lid-Driven 3D Porous Trapezoidal Nanofluid Filled Cavity under the Impact of Magnetic Field
Open Access
- 2 March 2020
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 10 (3) , 449
Abstract
Effects of a rotating cone in 3D mixed convection of CNT-water nanofluid in a double lid-driven porous trapezoidal cavity is numerically studied considering magnetic field effects. The numerical simulations are performed by using the finite element method. Impacts of Richardson number (between 0.05 and 50), angular rotational velocity of the cone (between −300 and 300), Hartmann number (between 0 and 50), Darcy number (between 10 and ), aspect ratio of the cone (between 0.25 and 2.5), horizontal location of the cone (between 0.35 H and 0.65 H) and solid particle volume fraction (between 0 and 0.004) on the convective heat transfer performance was studied. It was observed that the average Nusselt number rises with higher Richardson numbers for stationary cone while the effect is reverse for when the cone is rotating in clockwise direction at the highest supped. Higher discrepancies between the average Nusselt number is obtained for 2D cylinder and 3D cylinder configuration which is 28.5% at the highest rotational speed. Even though there are very slight variations between the average Nu values for 3D cylinder and 3D cone case, there are significant variations in the local variation of the average Nusselt number. Higher enhancements in the average Nusselt number are achieved with CNT particles even though the magnetic field reduced the convection and the value is 84.3% at the highest strength of magnetic field. Increasing the permeability resulted in higher local and average heat transfer rates for the 3D porous cavity. In this study, the aspect ratio of the cone was found to be an excellent tool for heat transfer enhancement while 95% enhancements in the average Nusselt number were obtained. The horizontal location of the cone was found to have slight effects on the Nusselt number variations.
Keywords
This publication has 65 references indexed in Scilit:
- MHD mixed convection and entropy generation in a lid-driven cavity with rotating cylinders filled by a nanofluid using two phase mixture modelJournal of Magnetism and Magnetic Materials, 2019
- MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: A two-phase numerical studyInternational Journal of Mechanical Sciences, 2019
- Laminar mixed convection flow and heat transfer characteristics in a lid driven cavity with a circular cylinderInternational Journal of Heat and Mass Transfer, 2013
- Natural convection of nanofluids in an enclosure between a circular and a sinusoidal cylinder in the presence of magnetic fieldInternational Communications in Heat and Mass Transfer, 2012
- Mixed convection flow in single- and double-lid driven square cavities filled with water–Al2O3 nanofluid: Effect of viscosity modelsEuropean Journal of Mechanics - B/Fluids, 2012
- Mixed convection in a lid driven square cavity with an isothermally heated square blockage insideInternational Journal of Heat and Mass Transfer, 2012
- Mixed convection heat transfer in a differentially heated square enclosure with a conductive rotating circular cylinder at different vertical locationsInternational Communications in Heat and Mass Transfer, 2011
- Steady mixed convection in a differentially heated square enclosure with an active rotating circular cylinderInternational Journal of Heat and Mass Transfer, 2010
- Fluid flow due to combined convection in lid-driven enclosure having a circular bodyInternational Journal of Heat and Fluid Flow, 2009
- Steady flow between a rotating circular cylinder and fixed square cylinderJournal of Fluid Mechanics, 1979