Electromagnetically driven two‐axis optical beam steering MEMS mirror and its dependence of actuation on magnetic field
Authors:
Open Access
- 21 October 2011
- journal article
- research article
- Published by Wiley in Electronics and Communications in Japan
- Vol. 94 (11) , 24-31
Abstract
This paper describes the development of an electromagnetically driven two‐axis MEMS mirror which steers an optical beam, and the dependence of the tilting angles on the magnet shape and size and the initial gap between planar coils and the magnet surface. A reflective Au mirror (1.8 × 1.8 mm2) can be tilted bidirectionally with an electromagnetic force induced by the current of the planar coils and the magnetic field of a permanent magnet. A newly developed MEMS mirror device (10 × 10 × 0.2 mm3) was set on a printed circuit board (15 × 15 × 1.0 mm3), and the board was fixed on a holder in which a magnet was inset. The utilized magnets were cubic (6, 8, and 15 mm square and 5 mm thick), cylindrical (6 and 8 mm in diameter and 5 mm thick), and spherical (8 mm in diameter) to investigate efficient actuation. The initial gaps of the planar coils and magnet surface were 0, 500, 1000, and 2000 μm. The magnetic flux density and its gradient decreased with distance from the magnet surface. The tilting angles of the MEMS mirror increased with decreasing size of the square magnet and shorter distance, and were largest when using a magnet 6 mm square and a 500‐μm gap, in which condition the maximum tilting angles in the X and Y directions were 2.95 and 3.68 deg/mA, respectively. In addition, we obtained 3D‐OCT images of human finger tissue by using a Fourier domain fiber interferometer with a newly developed MEMS mirror. © 2011 Wiley Periodicals, Inc. Electron Comm Jpn, 94(11): 24–31, 2011; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/ecj.10377Keywords
This publication has 5 references indexed in Scilit:
- Development of an Electromagnetically Driven Optical MEMS Mirror with Functions of Z-Axis Vibration and X, Y Bi-Directional Tilting, and an Application to Low Coherent Optical InterferometerIEEJ Transactions on Sensors and Micromachines, 2008
- A 2-axis optical scanner driven nonresonantly by electromagnetic force for OCT imagingJournal of Micromechanics and Microengineering, 2006
- A Combination of Fast Resonant Mode and Slow Static Deflection of SOI-PZT Actuators for MEMS Image Projection Display2006
- Silicon scanning mirror of two DOF with compensation current routingJournal of Micromechanics and Microengineering, 2004
- Silicon micromachined two-dimensional galvano optical scannerIEEE Transactions on Magnetics, 1994