Rheological and Aging Properties of Vegetable Oil-Based Polyurethane (V-PU) Modified Asphalt
Open Access
Abstract
To study the rheological and aging properties of vegetable oil–based polyurethane (V-PU) modified asphalt, V-PU terminated with an –NCO group was synthesized from renewable castor oil, and liquefied MDI-100LL and 10–40 wt% V-PU modified asphalts were prepared. Temperature classification, multiple stress creep recovery (MSCR), and linear amplitude scanning (LAS) tests were carried out. The results showed that the modulus, the creep recovery rate (R), and the yield stress and yield strain of the V-PU modified asphalts significantly increased in the order: 0 wt% < 10 wt% < 20 wt% < 40 wt% < 30 wt%, while the phase angle and the unrecoverable creep compliance (Jnr) changed in the opposite order, and the high temperature grade of 30 wt% V-PU modified asphalt was 4 grades higher than that of the base asphalt, which indicated that the addition of V-PU enhanced the fatigue, permanent deformation, and recovery deformation resistance. The 30 wt% sample exhibited phase inversion had the best performance. Comprehensive FTIR, GPC, and fluorescence microscopy analyses showed that the molecular weight significantly increased and the V-PU molecules agglomerated after aging. The excess –NCO groups of V-PU prepolymer react with water in the air and the active hydrogen in the asphalt system and finally form a cross-linked three-dimensional network structure with the asphalt to improve performance. The mechanism of intramolecular cementation reaction and the aging process of V-PU modified asphalt was creatively derived.Keywords
Funding Information
- National Natural Science Foundation of China (51478211, 2017-1103, 19043817Z)
- Ten Thousand Talents Plan (51478211, 2017-1103, 19043817Z)
- Hebei traffic science and technology project and major special projects of science and technology in Hebei Province (51478211, 2017-1103, 19043817Z)
This publication has 34 references indexed in Scilit:
- Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance – A laboratory studyConstruction and Building Materials, 2015
- Rheological and mechanistic characteristics of Bone Glue modified asphalt bindersConstruction and Building Materials, 2015
- High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR testsConstruction and Building Materials, 2015
- Evaluation of rutting properties of high density polyethylene modified bindersMaterials and Structures, 2014
- Correlation between multiple stress creep recovery (MSCR) results and polymer modification of binderConstruction and Building Materials, 2014
- Effect of high density polyethylene on the fatigue and rutting performance of hot mix asphalt – a laboratory studyRoad Materials and Pavement Design, 2014
- Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphaltConstruction and Building Materials, 2013
- Evaluation of Low-Temperature and Elastic Properties of Crumb Rubber– and SBS-Modified Bitumen and MixturesJournal of Materials in Civil Engineering, 2013
- Characterization of creep and recovery curve of polymer modified binderConstruction and Building Materials, 2012
- Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphaltConstruction and Building Materials, 2012