Interfacial Characterization of Low-Temperature Cu-to-Cu Direct Bonding with Chemical Mechanical Planarized Nanotwinned Cu Films
Open Access
Abstract
Copper-to-copper (Cu-to-Cu) direct bonding is a promising approach to replace traditional solder joints in three-dimensional integrated circuits (3D ICs) packaging. It has been commonly conducted at a temperature over 300 °C, which is detrimental to integrated electronic devices. In this study, highly (111)-oriented nanotwinned (nt) Cu films were fabricated and polished using chemical mechanical planarization (CMP) and electropolishing. We successfully bonded and remained columnar nt-Cu microstructure at a low temperature of 150 °C thanks to the rapid diffusion of Cu on (111) surface. We employed a new microstructural method to characterize quantitatively the interfacial bonding quality using cross-sectional and plan-view microstructural analyses. We discovered that CMP nt-Cu bonding quality was greater than that of electropolished nt-Cu ones. The CMP nt-Cu films possessed extremely low surface roughness and were virtually free of pre-existing interface voids. Thus, the bonding time of such CMP nt-Cu films could be significantly shortened to 10 min. We expect that these findings may offer a pathway to reduce the thermal budget and manufacturing cost of the current 3D ICs packaging technology.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 110-2634-F-009-027 and MOST 110-2221-E-A49 -075 -MY3.)
This publication has 49 references indexed in Scilit:
- The effect of nanotwins on the corrosion behavior of copperActa Materialia, 2014
- Anisotropic grain growth and crack propagation in eutectic microstructure under cyclic temperature annealing in flip-chip SnPb composite solder jointsScripta Materialia, 2013
- Unidirectional Growth of Microbumps on (111)-Oriented and Nanotwinned CopperScience, 2012
- Wafer-level Cu–Cu bonding technologyMicroelectronics Reliability, 2012
- Detwinning, damage and crack initiation during cyclic loading of Cu samples containing aligned nanotwinsActa Materialia, 2011
- Epitaxial nanotwinned Cu films with high strength and high conductivityApplied Physics Letters, 2008
- Mechanical deformation of high-purity sputter-deposited nano-twinned copperScripta Materialia, 2008
- Microstructure evolution and abnormal grain growth during copper wafer bondingApplied Physics Letters, 2002
- Predicting trends in rate parameters for self-diffusion on FCC metal surfacesSurface Science, 2002
- Harper-dorn creep in al, pb, and snMetallurgical Transactions, 1973