Wafer Level Surface Activated Bonding Tool for MEMS Packaging
Authors:
- 1 January 2004
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 151 (7) , G461-G467
Abstract
A wafer level surface activated bonding (SAB) tool has been developed for microelectromechanical systems (MEMS) packaging at low temperature. The tool accommodates 8 in. diam wafers. The principle features of the tool are the automatic parallel adjustment for 8 in. wafers to a margin of error within ±1 μm and the X, Y, and θ axis alignments with an accuracy of ±0.5 μm. We have approached a new integration technique for the integration of ionic crystals with transparent and nontransparent thin intermediate layers using this tool. Various sizes of patterned and bare silicon, Al silicate glass, and quartz wafers cleaned by a low energy argon ion source in a vacuum have been successfully bonded by this technique at low temperature. Radioisotope fine leak and vacuum seal tests of sealed silicon cavities show leak rates of 1.0×10−91.0×10−9 and 2.6×10−162.6×10−16 Pa/m3 s, respectively, which are lower than the American military standard encapsulation requirements for MEMS devices in harsh environments. Void-free interfaces with bonding strengths comparable to bulk materials are found. Low adhesion between SAB-processed ionic crystals without adhesive layers is believed to be due to radiation-induced discontinuous polarization. © 2004 The Electrochemical Society. All rights reserved.Keywords
This publication has 12 references indexed in Scilit:
- Characterization of silicon wafer bonding for Power MEMS applicationsSensors and Actuators A: Physical, 2003
- A new wafer-bonder of ultra-high precision using surface activated bonding (SAB) concept2002
- Investigation of the bonding strength and interface current of p-Si/n-GaAs wafers bonded by surface activated bonding at room temperatureJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2001
- Microfabrication of a high pressure bipropellant rocket engineSensors and Actuators A: Physical, 2001
- Room-temperature wafer bonding of Si to LiNbO3, LiTaO3and Gd3Ga5O12by Ar-beam surface activationJournal of Micromechanics and Microengineering, 2001
- The indent reflow sealing (IRS) technique-a method for the fabrication of sealed cavities for MEMS devicesJournal of Microelectromechanical Systems, 2000
- 1.3 μm InGaAsP/InP lasers on GaAs substrate fabricated by the surface activated wafer bonding method at room temperatureApplied Physics Letters, 1998
- Gas development at the interface of directly bonded silicon wafers: investigation on silicon-based pressure sensorsSensors and Actuators A: Physical, 1996
- Structure of AlAl and AlSi3N4 interfaces bonded at room temperature by means of the surface activation methodActa Metallurgica et Materialia, 1992
- Charge-transfer dipole moments at the Si–SiO2 interfaceJournal of Applied Physics, 1988