Blast Testing of RC Slabs Retrofitted with NSM CFRP Plates
Authors:
- 1 August 2007
- journal article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 10 (4) , 397-414
Abstract
In this paper, blast testing was performed on two reinforced concrete specimens: a plain reinforced concrete (RC) specimen; and an identical RC specimen retrofitted with near surface mounted (NSM) carbon fibre reinforced polymer (CFRP) plates. Each specimen was subjected to two separate explosive loads at a standoff distance of 0.6m, with the aim of investigating the performances of both specimens within both their elastic and plastic response ranges. The first blast (Blast 1) and second blast (Blast 2) consisted of an equivalent TNT charge weight of 0.079kg and 2.09kg respectively. The elastic-range responses of both specimens after the small shot (Blast 1), such as acceleration and deflection were obtained and comparisons were made between the specimens. The plastic performances of both specimens, such as tension face scabbing, crack patterns, plastic hinges and permanent deflection, after the large shot (Blast 2) were also analysed and compared. A number of unique failures and behaviours of both specimens were observed, investigated and analyzed. The test results provide a vital direction in the development of an optimal retrofit in future research.Keywords
This publication has 23 references indexed in Scilit:
- Blast resistance of FRP composites and polymer strengthened concrete and masonry structures – A state-of-the-art reviewComposites Part B: Engineering, 2007
- Failure Mechanisms of Polymer-Reinforced Concrete Masonry Walls Subjected to BlastJournal of Structural Engineering, 2005
- Progressive Analysis Procedure for Progressive CollapseJournal of Performance of Constructed Facilities, 2004
- Explosive Testing of Polymer Retrofit Masonry WallsJournal of Performance of Constructed Facilities, 2004
- Beam element formulation and solution procedure for dynamic progressive collapse analysisComputers & Structures, 2004
- Analysis of building collapse under blast loadsEngineering Structures, 2004
- Reliability analysis of direct shear and flexural failure modes of RC slabs under explosive loadingEngineering Structures, 2002
- Simulation of the dynamic response of concrete beams externally reinforced with carbon-fiber reinforced plasticComputers & Structures, 1997
- Analysis of impulsively loaded reinforced concrete structural elements—II. ImplementationComputers & Structures, 1993
- Analysis of impulsively loaded reinforced concrete structural elements—I. TheoryComputers & Structures, 1993