Superplasticity in a lean Fe-Mn-Al steel
Open Access
- 29 September 2017
- journal article
- research article
- Published by Springer Nature in Nature Communications
- Vol. 8 (1) , 1-6
Abstract
Superplastic alloys exhibit extremely high ductility (>300%) without cracks when tensile-strained at temperatures above half of their melting point. Superplasticity, which resembles the flow behavior of honey, is caused by grain boundary sliding in metals. Although several non-ferrous and ferrous superplastic alloys are reported, their practical applications are limited due to high material cost, low strength after forming, high deformation temperature, and complicated fabrication process. Here we introduce a new compositionally lean (Fe-6.6Mn-2.3Al, wt.%) superplastic medium Mn steel that resolves these limitations. The medium Mn steel is characterized by ultrafine grains, low material costs, simple fabrication, i.e., conventional hot and cold rolling, low deformation temperature (ca. 650 °C) and superior ductility above 1300% at 850 °C. We suggest that this ultrafine-grained medium Mn steel may accelerate the commercialization of superplastic ferrous alloys.Keywords
This publication has 32 references indexed in Scilit:
- Linear complexions: Confined chemical and structural states at dislocationsScience, 2015
- Developing superplasticity and a deformation mechanism map for the Zn–Al eutectoid alloy processed by high-pressure torsionMaterials Science and Engineering: A, 2011
- Seventy-five years of superplasticity: historic developments and new opportunitiesJournal of Materials Science, 2009
- Low-temperature superplasticity in nanostructured nickel and metal alloysNature, 1999
- Superplasticity of steels and ferrous alloysMaterials Science and Engineering: A, 1990
- Superplasticity in an Ni3Al base alloy with 8wt% CrJournal of Materials Science, 1990
- Superplastic deformation behavior in commercial and high purity Zn- 22 Pct AlMetallurgical Transactions A, 1988
- Fracture processes in superplastic flowMetal Science, 1982
- Factors influencing ductility in the superplastic Zn-22 Pct Al eutectoidMetallurgical Transactions A, 1977
- On the measurements of superplasticity in an Al-Cu alloyMetallurgical Transactions A, 1975