High-Performance Flexible Thermoelectric Power Generator Using Laser Multiscanning Lift-Off Process
Authors:
- Sun Jin KimSKSun Jin Kim
- Han Eol LeeHan Eol Lee
- Hyeongdo ChoiHCHyeongdo Choi
- Yongjun KimYKYongjun Kim
- Ju Hyung WeJWJu Hyung We
- Keon Jae LeeKLKeon Jae Lee
- Byung Jin ChoBCByung Jin Cho
- 21 November 2016
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 10 (12) , 10851-10857
Abstract
Flexible thermoelectric generators (f-TEGs) are emerging as a semi-permanent power source for self-powered sensors, which is an important area of research for the next generation smart network monitoring system in the internet-of-things (IoT) era. We report in this paper a f-TEG produced by a screen-printing technique (SPT) and a laser multi-scanning (LMS) lift-off process. A screen-printed TEG was fabricated on a SiO2/a-Si/quartz substrate via the SPT process and then the LMS process completely separated the rigid quartz substrate from the original TEG by selective reaction of the XeCl excimer laser with the exfoliation layer (a-Si). Using these techniques, we fabricate a prototype f-TEG composed of an array of 72 TE couples that exhibits high flexibility at various bending radii together with excellent output performance (4.78 mW/cm2 and 20.8 mW/g at a △T = 25°C). There is no significant change in the device performance even under repeated bending of 8,000 cycles.Keywords
Funding Information
- National Research Foundation of Korea (NRF- 2015R1A5A1036133)
This publication has 32 references indexed in Scilit:
- Progress in triboelectric nanogenerators as a new energy technology and self-powered sensorsEnergy & Environmental Science, 2015
- Vertically stacked thin triboelectric nanogenerator for wind energy harvestingNano Energy, 2015
- Highly efficient and bending durable perovskite solar cells: toward a wearable power sourceEnergy & Environmental Science, 2014
- Flexible Crossbar‐Structured Resistive Memory Arrays on Plastic Substrates via Inorganic‐Based Laser Lift‐OffAdvanced Materials, 2014
- Highly‐Efficient, Flexible Piezoelectric PZT Thin Film Nanogenerator on Plastic SubstratesAdvanced Materials, 2014
- Fabrication of Flexible Thermoelectric Thin Film Devices by Inkjet PrintingSmall, 2014
- Flexible and lightweight thermoelectric generators composed of carbon nanotube–polystyrene composites printed on film substrateApplied Physics Letters, 2013
- Flexible thermoelectric generator for wearable biometric sensors2010
- Wearable electronics self-powered by using human body heat: The state of the art and the perspectiveJournal of Renewable and Sustainable Energy, 2009
- Ultrathin silicon solar microcells for semitransparent, mechanically flexible and microconcentrator module designsNature Materials, 2008