Static and Dynamic Responses of Reinforced Concrete Structures under Sudden Column Removal Scenario Subjected to Distributed Loading
- 1 January 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 145 (1)
Abstract
In this paper, static and dynamic experiments on reinforced concrete beam-column frames under single-column-removal scenario applying a multipoint loading method were conducted. One of the objectives was to investigate structural behavior compared with the single-point loading method, which has been popularly used in previous studies. By equally applying point loads at four locations of the double-span beam structure, the test setup successfully simulated the uniformly distributed loading condition, which is generally applicable for gravity loads in practice. Compared with the previously conducted static tests based on concentrated loading method, structural response from the static tests under multipoint loading condition differed not only on load-bearing capacity but also on failure sequence and displacement profile. On the basis of the test results, the analytical relationship between behaviors of the two loading methods was developed and verified. Compared with the static tests, the dynamic tests highlighted dynamic effects created by the column loss event and confirmed the structural behavior and failure modes observed in the static environment. The dynamic tests also verified the correctness and conservatism of the dynamic assessment framework using a previously proposed energy-based approach. Most important, both the static and the dynamic tests of structures under distributed loads showed less development of catenary action against progressive collapse compared with concentrated loading tests.Keywords
This publication has 23 references indexed in Scilit:
- Experimental investigation of RC beam-slab substructures against progressive collapse subject to an edge-column-removal scenarioEngineering Structures, 2017
- Experimental study on dynamic responses of reinforced concrete frames under sudden column removal applying concentrated loadingEngineering Structures, 2017
- Analytical Model for Compressive Arch Action in Horizontally Restrained Beam-Column SubassemblagesACI Structural Journal, 2016
- Dynamic Performance of Flush End-Plate Beam-Column Connections and Design Applications in Progressive CollapseJournal of Structural Engineering, 2016
- Dynamic Response of a RC Frame under Column RemovalJournal of Performance of Constructed Facilities, 2014
- Modeling of Reinforced Concrete Assemblies under Column-Removal ScenarioJournal of Structural Engineering, 2014
- Progressive collapse-resisting capacity of RC beam–column sub-assemblageMagazine of Concrete Research, 2011
- Macromodel-Based Simulation of Progressive Collapse: RC Frame StructuresJournal of Structural Engineering, 2008
- Progressive collapse of multi-storey buildings due to sudden column loss — Part I: Simplified assessment frameworkEngineering Structures, 2008
- Seismic Design of Reinforced Concrete and Masonry Buildings1992