A dynamic electrically driven soft valve for control of soft hydraulic actuators
- 20 August 2021
- journal article
- research article
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 118 (34)
Abstract
Regulation systems for fluid-driven soft robots predominantly consist of inflexible and bulky components. These rigid structures considerably limit the adaptability and mobility of these robots. Soft valves in various forms for fluidic actuators have been developed, primarily fluidically or electrically driven. However, fluidic soft valves require external pressure sources that limit robot locomotion. State-of-the-art electrostatic valves are unable to modulate pressure beyond 3.5 kPa with a sufficient flow rate (>6 mL⋅min−1). In this work, we present an electrically powered soft valve for hydraulic actuators with mesoscale channels based on a different class of ultrahigh-power density dynamic dielectric elastomer actuators. The dynamic dielectric elastomer actuators (DEAs) are actuated at 500 Hz or above. These DEAs generate 300% higher blocked force compared with the dynamic DEAs in previous works and their loaded power density reaches 290 W⋅kg−1 at operating conditions. The soft valves are developed with compact (7 mm tall) and lightweight (0.35 g) dynamic DEAs, and they allow effective control of up to 51 kPa of pressure and a 40 mL⋅min−1 flow rate with a response time less than 0.1 s. The valves can also tune flow rates based on their driving voltages. Using the DEA soft valves, we demonstrate control of hydraulic actuators of different volumes and achieve independent control of multiple actuators powered by a single pressure source. This compact and lightweight DEA valve is capable of unprecedented electrical control of hydraulic actuators, showing the potential for future onboard motion control of soft fluid-driven robots. Significance Soft actuators have advantages over traditional rigid robots in various applications due to their robustness, low mechanical stiffness, and low weight. Thus far, conventional rigid valves are the most common approach to control hydraulic soft actuators. Although soft valves have been designed in various forms, they have not achieved the pressure or flow rate conditions as required by many existing hydraulic actuators. In this paper, we introduce an electrically driven soft valve using dynamic dielectric elastomer actuators (DEAs). These soft valves have a fast response time and are able to control fluidic pressure and flow rates that match the needs of hydraulic actuators with mesoscale channels. The DEA valves enable possibilities for soft onboard controls for future fluidic soft robots.Keywords
This publication has 53 references indexed in Scilit:
- Pneumatic and hydraulic microactuators: a reviewJournal of Micromechanics and Microengineering, 2010
- Electrostatically-driven elastomer components for user-reconfigurable high density microfluidicsLab on a Chip, 2009
- Arrayed pH-responsive microvalves controlled by multiphase laminar flowJournal of Micromechanics and Microengineering, 2007
- A latchable microvalve using phase change of paraffin waxSensors and Actuators A: Physical, 2007
- An Electrostatic, On/Off Microvalve Designed for Gas Fuel Delivery for the MIT MicroengineJournal of Microelectromechanical Systems, 2004
- Single-use, thermally actuated paraffin valves for microfluidic applicationsSensors and Actuators B: Chemical, 2004
- On the weibull shape factor of intrinsic breakdown of dielectric films and its accurate experimental determination-part II: experimental results and the effects of stress conditionsIEEE Transactions on Electron Devices, 2002
- Microfluidic Large-Scale IntegrationScience, 2002
- Monolithic Microfabricated Valves and Pumps by Multilayer Soft LithographyScience, 2000
- High-Speed Electrically Actuated Elastomers with Strain Greater Than 100%Science, 2000