Measurement Procedure for Cyclostationary Characterization of PCB Radiated Emissions
Authors:
- 1 September 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 0320-0324
Abstract
Measurement techniques of stochastic electromagnetic emissions in the near-field of the PCB can be realized in time domain by sensing of the transient emissions with a scanning system equipped by two probes and real time digital oscilloscope. Radiated electromagnetic interference originating from digital circuitry exhibits properties of cyclostationarity caused by random bit sequence travelling along the line over the surface of the PCB. The relation between the source signal and the signals measured by the near-field probe at each scanning point was modelled by an impulse response describing linear transformation of the source signal. In this paper evaluation procedure for obtaining impulse responses in all scanning points over the PCB by appropriate cyclic averaging of stochastic signals simultaneously measured by the reference and scanning probes is presented. Obtained impulse responses can be used for computer aid prediction of the spatial-time evolution of the cyclostationary characteristics in the environment surrounding the PCB and directly on the surface of the PCB. Verification of the described measurement procedure was implemented by comparison of the calculated autocovariance function based on impulse response and the same autocovariance function evaluated from the measurement results for digital data sequence with different cyclostationary properties.Keywords
This publication has 9 references indexed in Scilit:
- Characterization of the Cyclostationary Emissions in the Near-Field of Electronic Device2018
- Cyclostationary Source Separation in the Near-Field of Electronic Devices2018
- Time-domain stochastic electromagnetic field propagator based on Jefimenko's equations2018
- Time delay estimation of cyclostationary signals on PCB using spectral correlation function2018
- Near-field propagation of cyclostationary stochastic electromagnetic fields2015
- Cyclostationarity by examplesMechanical Systems and Signal Processing, 2009
- Cyclostationary modelling of rotating machine vibration signalsMechanical Systems and Signal Processing, 2004
- Printed Circuit Board Design Techniques for EMC Compliance2000
- Identification and deconvolution of multichannel linear non-Gaussian processes using higher order statistics and inverse filter criteriaIEEE Transactions on Signal Processing, 1997