Blockage formation in water-flooding heavy oil reservoirs: The distribution rule and the scaling mechanism
Authors:
- 1 August 2021
- journal article
- conference paper
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (8) , 087108
Abstract
Blockage is a common problem in the development of water-flooding reservoirs. The key to solve this problem is to determine the composition and distribution rules of the blockage. In this work, the location distribution and components of blockage were analyzed by one-dimensional (1D) and two-dimensional (2D) cores, and x-ray diffraction and differential weight methods. The blockage formation mechanism was also studied. The 1D experimental results show that the blocking locations of the inlet and outlet ends are 3/10 and 8/10, respectively (1D core is divided into 10 equidistant sections; “3/10” refers to the three sections from the inlet end and “8/10” refers to the two sections from the outlet end). The blockage near the inlet is mainly composed of inorganic scale, which is formed by a combination of the carbonate and coarse sand particles. However, the blockage near the outlet is mainly composite scale, which is formed by the fine particles and inorganic scale with heavy oil. In addition, the water sensitivity with clay leads to the decrease in permeability. This work provides a theoretical and scientific basis for the development of technology to effectively prevent reservoir blockage.Keywords
Funding Information
- National Nature Science Foundation of China (51774309)
- China National Postdoctoral Program for Innovative Talents (BX20200386)
- Fundamental Research Funds for the Central Universities (20CX06093A)
- Graduate School Innovation program of China University of Petroleum (YCX2019018)
This publication has 49 references indexed in Scilit:
- Laboratory investigation on hydraulic conductivity changes in sands due to injection pressure increaseArabian Journal of Geosciences, 2013
- Study of the scaling formation mechanism in recycling waterEnvironmental Technology, 2011
- Experimental Study of Water Injection into Geothermal SystemsTransport in Porous Media, 2010
- Laboratory and prediction of barium sulfate scaling at high-barium formation waterJournal of Petroleum Science and Engineering, 2010
- Scale Formation Due to Water Injection in Berea Sandstone CoresJournal of Applied Sciences, 2009
- Barium Sulfate Scale Formation in Oil Reservoir During Water Injection at High-Barium Formation WaterJournal of Applied Sciences, 2007
- Theoretical and experimental study of particle movement and deposition in porous media during water injectionJournal of Petroleum Science and Engineering, 2004
- Model study on the kinetics of oil field formation damage due to salt precipitation from injectionJournal of Petroleum Science and Engineering, 2004
- Water sensitivity of sandstones containing swelling and non-swelling claysColloids and Surfaces A: Physicochemical and Engineering Aspects, 1993
- Sandstone water sensitivity: Existence of a critical rate of salinity decrease for particle captureChemical Engineering Science, 1983