Modeling and Fault Size Estimation for Non-Penetrating Damage in the Outer Raceway of Tapered Roller Bearing
Open Access
Abstract
The fault quantification of a tapered roller bearing (TRB) can provide a reliable guide for predictive maintenance. Currently, damage size estimation based on vibration signals has been proposed and developed. However, most approaches are focused on the theory of ball bearings. Unlike the point contact of a ball bearing, the contact between the tapered roller and the raceway is a line contact. So, the current practices based on the micro-motion theory of ball bearings are limited when estimating the TRB’s fault. To accurately estimate the TRB’s damage size, a dynamic model of non-penetrating damaged TRB was established to research the vibration response mechanism and explain the influence. The model takes the deflection factor of a tapered roller into consideration and uses the elastohydrodynamic lubrication model to simulate the influence of the lubrication factor. Then, a revised formula for estimating the TRBs’ fault size is proposed by uncovering the relationship between the impact time and the damage location. Simulation analysis and experimental analysis prove the correctness of the dynamic model and the effectiveness of the size estimation formula.Keywords
Funding Information
- National Key R&D Program of China (2019YFB2004302)
This publication has 31 references indexed in Scilit:
- Impact Force Based Model for Bearing Local Fault IdentificationJournal of Vibration and Acoustics, 2015
- Dual-Impulse Response Model for the Acoustic Emission Produced by a Spall and the Size Evaluation in Rolling Element BearingsIEEE Transactions on Industrial Electronics, 2015
- A New Model for the Relationship Between Vibration Characteristics Caused by the Time-Varying Contact Stiffness of a Deep Groove Ball Bearing and Defect SizesJournal of Tribology, 2015
- A nonlinear dynamic vibration model of defective bearings – The importance of modelling the finite size of rolling elementsMechanical Systems and Signal Processing, 2015
- Precise measurement of defect width in tapered roller bearing using vibration signalMeasurement, 2014
- Quantifying the added value of an imperfectly performing condition monitoring system—Application to a wind turbine gearboxReliability Engineering & System Safety, 2013
- Vibration response of spalled rolling element bearings: Observations, simulations and signal processing techniques to track the spall sizeMechanical Systems and Signal Processing, 2011
- A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in RacesJournal of Tribology, 2010
- A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect sizeMechanical Systems and Signal Processing, 2006
- Elasto-Hydrodynamic Lubrication (International Series in Material, Science and Technology, Vol. 23)Journal of Lubrication Technology, 1978