Effects of self‐assembled nucleating agent on the crystallization behavior, thermal properties, and mechanical properties of polylactic acid
Authors:
- 24 May 2023
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (31)
Abstract
Polylactic acid (PLA) is a biodegradable polyester, but its low crystallization rate and excessive embrittlement limit its application. Decanedioic acid 1,10‐bis (2‐benzoylhydrazide) (TMC‐300) as an effective nucleating agent of PLA will induce PLA epitaxial crystallization and improve the crystallization rate of PLA. This article studied the promoting behavior of TMC‐300 with different contents in composite systems on PLA crystallization. The results showed that with the increase of TMC‐300 content, the crystallinity can be significantly increased, up to 22 times, and t1/2 significantly decreases. Meanwhile, with the addition of TMC‐300, the typical spherical crystal morphology of PLA gradually became attached to TMC‐300 fibrous crystal morphology. In terms of mechanical properties, the tensile strength reached its maximum at 0.5 wt% of TMC‐300 content, increasing from 60.60 MPa (PLA) to 74.59 MPa (0.5‐TMC‐300), an increase of 23.09%. At this time, due to the reduction in spherical crystal size, the elongation at break also increased significantly. However, the thermal stability of PLA composites deteriorated with the increase of nucleating agent content due to the low thermal decomposition temperature of TMC‐300 itself, and the Tmax decreased from 372°C (PLA) to 353°C (5‐TMC‐300), a decrease of 19°C.Keywords
Funding Information
- Natural Science Basic Research Program of Shaanxi Province (2021JM‐431)
This publication has 35 references indexed in Scilit:
- Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging MaterialsCritical Reviews in Food Science and Nutrition, 2012
- Utilization of Oligo(lactic acid) for Studies of Chain Conformation and Chain Packing in Poly(lactic acid)Macromolecules, 2011
- Control of Crystal Morphology in Poly(l-lactide) by Adding Nucleating AgentMacromolecules, 2011
- Induced Crystallization of PLLA in the Presence of 1,3,5‐Benzenetricarboxylamide Derivatives as Nucleators: Preparation of Haze‐Free Crystalline PLLA MaterialsMacromolecular Materials and Engineering, 2010
- Polymorphism and isomorphism in biodegradable polyestersProgress in Polymer Science, 2009
- Biodegradability of polylactide bottles in real and simulated composting conditionsPolymer Testing, 2007
- Physical and mechanical properties of poly(L‐lactic acid) nucleated by dibenzoylhydrazide compoundJournal of Applied Polymer Science, 2006
- Nucleating agent for poly(L‐lactic acid)—An optimization of chemical structure of hydrazide compound for advanced nucleation abilityJournal of Applied Polymer Science, 2006
- Cold Crystallization of PLLA Studied by Simultaneous SAXS and WAXSMacromolecular Materials and Engineering, 2004
- Amorphous cell studies of polyglycolic, poly(l-lactic), poly(l,d-lactic) and poly(glycolic/l-lactic) acidsPolymer, 2002