Optimization Scheme for Construction Ventilation in Large-Scale Underground Oil Storage Caverns
Open Access
- 17 October 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (10) , 1952
Abstract
The ventilation effect has a direct influence on the efficiency and security of the construction of an underground cavern group. Traditional forced ventilation schemes may be ineffective and result in resource wastage. Based on the construction ventilation of the Jinzhou underground oil storage project, an axial flow gallery ventilation mode using shafts as the fresh air inlet was proposed. A 3D steady RANS (Reynolds Averaged Navier-Stokes) approach with the RNG (Renormalization-group) k-ε turbulence model was used to study airflow behavior and hazardous gas dispersion when different ventilation schemes were employed. Field test values of the air velocity and CO concentration in the main cavern and construction roadway were also adopted to validate the RNG k-ε turbulence model. The results showed that the axial flow gallery ventilation mode can ensure that the direction of air flow is the same as that of heavy trucks, fresh air is always near the excavation face, and the disturbance of the construction process is greatly reduced. The scheme is suitable for large-scale caverns with a ventilation distance less than 2 km, and an intermediate construction shaft is not needed. When the ventilation distance exceeds 2 km, it is possible to use jet fans to assist the axial flow gallery ventilation mode or to completely adopt jet-flow gallery ventilation.Keywords
This publication has 23 references indexed in Scilit:
- Computational study of effects of traffic force on the ventilation in highway curved tunnelsTunnelling and Underground Space Technology, 2011
- Auxiliary ventilation in mining roadways driven with roadheaders: Validated CFD modelling of dust behaviourTunnelling and Underground Space Technology, 2011
- A practical use of CFD for ventilation of underground worksTunnelling and Underground Space Technology, 2011
- Computational study of effects of jet fans on the ventilation of a highway curved tunnelTunnelling and Underground Space Technology, 2010
- Construction schedule simulation of a diversion tunnel based on the optimized ventilation timeJournal of Hazardous Materials, 2009
- The computational modeling of the ventilation flows within a rapid development drivageTunnelling and Underground Space Technology, 2007
- Numerical and experimental analysis of different ventilation systems in deep minesBuilding and Environment, 2006
- Numerical study of dust lifting in a channel with vertical obstaclesJournal of Loss Prevention in the Process Industries, 2001
- Solution of the implicitly discretised fluid flow equations by operator-splittingJournal of Computational Physics, 1986
- The numerical computation of turbulent flowsComputer Methods in Applied Mechanics and Engineering, 1974