Drag and lift forces on clean spherical and ellipsoidal bubbles in a solid-body rotating flow
Authors:
- 19 July 2011
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 682, 434-459
Abstract
A single bubble is placed in a solid-body rotating flow of silicon oil. From the measurement of its equilibrium position, lift and drag forces are determined. Five different silicon oils have been used, providing five different viscosities and Morton numbers. Experiments have been performed over a wide range of bubble Reynolds numbers (0.7 ≤ Re ≤ 380), Rossby numbers (0.58 ≤ Ro ≤ 26) and bubble aspect ratios (1 ≤ χ ≤ 3). For spherical bubbles, the drag coefficient at the first order is the same as that of clean spherical bubbles in a uniform flow. It noticeably increases with the local shear S = Ro−1, following a Ro−5/2 power law. The lift coefficient tends to 0.5 for large Re numbers and rapidly decreases as Re tends to zero, in agreement with existing simulations. It becomes hardly measurable for Re approaching unity. When bubbles start to shrink with Re numbers decreasing slowly, drag and lift coefficients instantaneously follow their stationary curves versus Re. In the standard Eötvös–Reynolds diagram, the transitions from spherical to deformed shapes slightly differ from the uniform flow case, with asymmetric shapes appearing. The aspect ratio χ for deformed bubbles increases with the Weber number following a law which lies in between the two expressions derived from the potential flow theory by Moore (J. Fluid Mech., vol. 6, 1959, pp. 113–130) and Moore (J. Fluid Mech., vol. 23, 1965, pp. 749–766) at low- and moderate We, and the bubble orients with an angle between its minor axis and the direction of the flow that increases for low Ro. The drag coefficient increases with χ, to an extent which is well predicted by the Moore (1965) drag law at high Re and Ro. The lift coefficient is a function of both χ and Re. It increases linearly with (χ − 1) at high Re, in line with the inviscid theory, while in the intermediate range of Reynolds numbers, a decrease of lift with aspect ratio is observed. However, the deformation is not sufficient for a reversal of lift to occur.Keywords
This publication has 36 references indexed in Scilit:
- Drag and lift forces on particles in a rotating flowJournal of Fluid Mechanics, 2009
- Migration and deformation of bubbles rising in a wall-bounded shear flow at finite Reynolds numberJournal of Fluid Mechanics, 2009
- Shape oscillations on bubbles rising in clean and in tap waterPhysics of Fluids, 2008
- A sphere in a uniformly rotating or shearing flowJournal of Fluid Mechanics, 2008
- Drag and lift forces on a bubble rising near a vertical wall in a viscous liquidJournal of Fluid Mechanics, 2002
- Transverse migration of single bubbles in simple shear flowsChemical Engineering Science, 2002
- The structure of the axisymmetric high-Reynolds number flow around an ellipsoidal bubble of fixed shapePhysics of Fluids, 1995
- On the deformation and drag of a falling viscous drop at low Reynolds numberJournal of Fluid Mechanics, 1964
- The Oseen resistance of a particle of arbitrary shapeJournal of Fluid Mechanics, 1961
- Slow flow past ellipsoids of revolutionJournal of Fluid Mechanics, 1961