Compact microstrip bandstop filters using stepped-impedance resonator (SIR) and spur-line sections
Authors:
- 1 January 2006
- journal article
- Published by Institution of Engineering and Technology (IET) in IEE Proceedings - Microwaves, Antennas and Propagation
- Vol. 153 (5) , 435-440
Abstract
Bandstop filters (BSFs) with high skirt selectivity as well as wide rejection bandwidth are designed by means of open-ended λg/4 stepped-impedance resonators (SIRs) and spur-line sections. Base on the formula of an SIR, the frequency of a transmission zero (fz) is accurately predicted. It is found that the impedance and length ratio can be simultaneously obtained to improve stopband performance of the filters. The transmission zero is purposely located at a lower frequency to achieve the high skirt selectivity. On the contrary, if it is adequately situated at a higher frequency, the stopband bandwidth can be increased. Also, the spur-line structure is investigated by transmission line theory and applied to provide an extra transmission zero in the stopband. With a proper choice of the even- and odd-mode characteristic impedances of the spur-line, the stopband bandwidth can be further extended. Realised by planar microstrip technology, the proposed BSF with its high skirt selectivity has a maximal value of 86.8 dB/GHz, while the other type of BSF can further widen the −20 dB stopband by 29% significantly, when incorporating the spur-line into the BSF with an SIR. Both have a size reduction benefit of better than 40% with respective to the conventional case.Keywords
This publication has 15 references indexed in Scilit:
- Theory and Application of Compact Microstrip PBG Cell for Wide Stop-Band FilterIEICE Transactions on Electronics, 2005
- A 5-GHz monolithic silicon bipolar down-converter with on-chip image filtering2004
- Novel compact microstrip interdigital bandstop filtersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2004
- Direct Synthesis of a New Class of Bandstop FiltersIEEE Transactions on Microwave Theory and Techniques, 2004
- A novel phase noise reduction technique in oscillators using defected ground structureIEEE Microwave and Wireless Components Letters, 2002
- A design of the low-pass filter using the novel microstrip defected ground structureIEEE Transactions on Microwave Theory and Techniques, 2001
- A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuitIEEE Transactions on Microwave Theory and Techniques, 1999
- Parallel-plate mode reduction in conductor-backed slots using electromagnetic bandgap substratesIEEE Transactions on Microwave Theory and Techniques, 1999
- L-resonator bandstop filtersIEEE Transactions on Microwave Theory and Techniques, 1996
- Reducing local oscillator phase noise limitations on the frequency stability of passive frequency standards: tests of a new conceptIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1994