Use of silanes and copolymers as adhesion promoters in glass fiber/polyethylene composites
- 5 April 2001
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 80 (14) , 2877-2888
Abstract
Two organofunctional silanes and three functionalized copolymers were used as adhesion promoters in glass fiber/polyethylene‐reinforced composites. The performance of the coupling agents was investigated by mechanical property measurements, scanning electron microscopy, and dynamic mechanical analysis. Coupling achieved with the poly(ethylene‐g‐maleic anhydride) copolymer proved to be the most successful compared with the other copolymers (ethylene/vinyl alcohol, ethylene/acrylic acid) and silane agents (γ‐methacryloxypropyltrimethoxy, cationic styryl). The combined coupling performance of the silanes and copolymers examined in this study appears to be controlled by the coupling performance of the copolymer. Effective coupling was reflected in increased mechanical properties. Increased fiber/matrix adhesion is not always associated with effective coupling because structural changes occurring at the interface region can result in a deterioration of the material property. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2877–2888, 2001Keywords
This publication has 28 references indexed in Scilit:
- Acid-base interactions on interfacial adhesion and mechanical responses for glass-fiber-reinforced low-density polyethyleneJournal of Applied Polymer Science, 1997
- Stress relaxation behaviour of unidirectional polyethylene-glass fibres PMMA composite laminatesPolymer, 1996
- Influence of glass beads on the elongational viscosity of polyethylene with anomalous strain rate dependence of the strain-hardeningPolymer, 1996
- Composite of polyethylene and kenaf, a natural cellulose fiberJournal of Applied Polymer Science, 1994
- Effect of salts on the formation of THF in preparation of PBT by TPA processJournal of Applied Polymer Science, 1992
- Microdamage and interfacial adhesion in glass bead-filled high-density polyethyleneJournal of Materials Science, 1992
- Influence of talc's morphological characteristics on the toughness of a composite based on low‐density polyethylene and polypropylene blendsPolymer Composites, 1988
- The mechanical and physical ageing of semicrystalline polymers: 1Polymer, 1987
- Ultrasonically delaminated and coarse mica particles as reinforcements for polypropyleneJournal of Applied Polymer Science, 1982
- An experimental technique for predicting foam processability and physical propertiesPolymer Engineering & Science, 1976