Graphene-Based Electrodes in a Vanadium Redox Flow Battery Produced by Rapid Low-Pressure Combined Gas Plasma Treatments
Open Access
- 26 May 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (11) , 4106-4121
Abstract
The development of high-power density vanadium redox flow batteries (VRFBs) with high energy efficiencies (EEs) is crucial for the widespread dissemination of this energy storage technology. In this work, we report the production of novel hierarchical carbonaceous nanomaterials for VRFB electrodes with high catalytic activity toward the vanadium redox reactions (VO2+/VO2+ and V2+/V3+). The electrode materials are produced through a rapid (minute timescale) low-pressure combined gas plasma treatment of graphite felts (GFs) in an inductively coupled radio frequency reactor. By systematically studying the effects of either pure gases (O2 and N2) or their combination at different gas plasma pressures, the electrodes are optimized to reduce their kinetic polarization for the VRFB redox reactions. To further enhance the catalytic surface area of the electrodes, single-/few-layer graphene, produced by highly scalable wet-jet milling exfoliation of graphite, is incorporated into the GFs through an infiltration method in the presence of a polymeric binder. Depending on the thickness of the proton-exchange membrane (Nafion 115 or Nafion XL), our optimized VRFB configurations can efficiently operate within a wide range of charge/discharge current densities, exhibiting energy efficiencies up to 93.9%, 90.8%, 88.3%, 85.6%, 77.6%, and 69.5% at 25, 50, 75, 100, 200, and 300 mA cm–2, respectively. Our technology is cost-competitive when compared to commercial ones (additional electrode costs < 100 € m–2) and shows EEs rivalling the record-high values reported for efficient systems to date. Our work remarks on the importance to study modified plasma conditions or plasma methods alternative to those reported previously (e.g., atmospheric plasmas) to improve further the electrode performances of the current VRFB systems.Keywords
All Related Versions
Funding Information
- European Commission (957273)
- H2020 Marie Sklodowska-Curie Actions (813036)
- Horizon 2020 Framework Programme (785219, 881603)
- Ministero degli Affari Esteri e della Cooperazione Internazionale (PGR05249)
- Agreement Istituto Italiano di Tecnologia (0018079/16)
- ENEL Green Power S.p.A (0018079/16)
This publication has 234 references indexed in Scilit:
- Analysis of heat-treated graphite oxide by X-ray photoelectron spectroscopyJournal of Materials Science, 2013
- Investigation of several graphite-based electrodes for vanadium redox flow cellJournal of Power Sources, 2013
- Modeling a vanadium redox flow battery system for large scale applicationsEnergy Conversion and Management, 2013
- High-voltage aqueous battery approaching 3 V using an acidic–alkaline double electrolyteChemical Communications, 2013
- Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteriesCarbon, 2012
- Dramatic performance gains in vanadium redox flow batteries through modified cell architectureJournal of Power Sources, 2012
- A review of energy storage technologies for wind power applicationsRenewable and Sustainable Energy Reviews, 2012
- Hydrothermal ammoniated treatment of PAN-graphite felt for vanadium redox flow batteryJournal of Solid State Electrochemistry, 2011
- Vanadium recovery from oil fly ash by leaching, precipitation and solvent extraction processesWaste Management, 2007
- Processing of vanadium: a reviewMinerals Engineering, 2003