CFD Simulations to Study Parameters Affecting Gas Explosion Venting in Compressor Compartments
Authors:
- Kang CenKCKang Cen
- Yan HuangYHYan Huang
- Qingsheng WangQWQingsheng Wang
Open Access
- 1 January 2017
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2017 (1)
Abstract
In this work, a series of vented explosions in a typical compressor compartment are simulated using FLACS code to analyze the explosion venting characteristics. The effects of relevant parameters on the pressure peaks (i.e., overpressure and negative pressure) are also numerically investigated, including vent area ratio of the compressor compartment, vent activation pressure, mass per unit area of vent panels, and volume blockage ratio of obstacles. In addition, the orthogonal experiment design and improved grey relational analysis are implemented to evaluate the impact degree of these relevant parameters. The results show that the pressure peaks decrease with the increase of vent area ratio. There is an approximately linearly increasing relationship between the pressure peaks and the vent activation pressure. The pressure peaks increase with the mass per unit area of vent panels. The pressure peaks increase with the volume blockage ratio of obstacles. Based on the grey relational grade values, the effects of these relevant parameters on the overpressure peak are ranked as follows: volume blockage ratio of obstacles > vent activation pressure > vent area ratio > mass per unit area of vent panels. These achievements provide effective guidance for the venting safety design of gas compressor compartments.Keywords
Funding Information
- National Natural Science Foundation of China (51474184)
This publication has 20 references indexed in Scilit:
- Vent burst pressure effects on vented gas explosion reduced pressureJournal of Loss Prevention in the Process Industries, 2015
- The effect of vent size and congestion in large-scale vented natural gas/air explosionsJournal of Loss Prevention in the Process Industries, 2015
- Study on the flame propagation and gas explosion in propane/air mixturesFuel, 2015
- Comparison of empirical and semi-empirical equations for vented gas explosion with experimental dataJournal of Loss Prevention in the Process Industries, 2013
- Experimental study on vented gas explosion in a cylindrical vessel with a vent ductProcess Safety and Environmental Protection, 2013
- Dust explosion hazard assessmentJournal of Loss Prevention in the Process Industries, 2010
- Effect of Ignition Location, Vent Size, and Obstacles on Vented Explosion Overpressures in Propane-Air MixturesCombustion Science and Technology, 2010
- A CFD based approach to the correlation of maximum explosion overpressure to process plant parametersJournal of Loss Prevention in the Process Industries, 2009
- An application of 3D gasdynamic modeling for the prediction of overpressures in vented enclosuresJournal of Loss Prevention in the Process Industries, 2007
- On the effect of venting large vessels with mass inert panelsJournal of Loss Prevention in the Process Industries, 1998