Failure analysis of a re-design knuckle using topology optimization
Authors:
Open Access
- 26 August 2019
- journal article
- research article
- Published by Copernicus GmbH in Mechanical Sciences
- Vol. 10 (2) , 465-473
Abstract
In this study, a systematic design process is carried out for the design of the knuckle. A systematic method is proposed for the design and analysis of a lightweight steering knuckle in an electric vehicle. In the proposed approach, a finite element (FE) model of the knuckle is constructed based on an inspection of the suspension and steering requirements of the target vehicle and the results of a kinematic analysis. A two-stage topology optimization method is then applied to refine the material distribution within the FE model in such a way as to minimize the knuckle weight. Finally, FE simulations are performed to evaluate the strength of the knuckle under road impact conditions and to determine the fatigue life of the knuckle for four ISO 8608 road classes (A–D). The results show that the optimized knuckle has a weight of 3.64 kg (approximately 6.2 % lighter than the original knuckle of the same strength and material) and achieves fatigue lives of 2.512×1011, 2.972×108, 5.598×103 and 2.432×101 cycles for road classes A, B, C and D, respectively.Keywords
This publication has 7 references indexed in Scilit:
- Design and Optimization of Steering Upright to Reduce the Weight Using FEASAE International Journal of Advances and Current Practices in Mobility, 2018
- FATIGUE LIFE ANALYSIS AND OPTIMIZATION OF A PASSENGER CAR STEERING KNUCKLE UNDER OPERATING CONDITIONSInternational Journal of Automotive and Mechanical Engineering, 2015
- Evaluation of metal matrix composite to replace spheroidal graphite iron for a critical component, steering knuckleMaterials & Design (1980-2015), 2013
- Reliability-based design optimization of knuckle component using conservative method of moving least squares meta-modelsProbabilistic Engineering Mechanics, 2011
- The Analysis on Destruction Forms of Steering Knuckle2011
- Improvement of Vehicle Ride Performance Using a Hydro-pneumatic Active Suspension SystemSAE International Journal of Advances and Current Practices in Mobility, 2006
- Fatigue Life Comparisons of Competing Manufacturing Processes: A Study of Steering KnuckleSAE International Journal of Advances and Current Practices in Mobility, 2004