Characterization and thermal analysis of mixed shrub and coffee husk bio-pellets at various molding conditions
- 20 August 2026
- journal article
- research article
- Published by SAGE Publications in International Wood Products Journal
Abstract
Recent advancements in renewable energy sources have highlighted the development of bio-pellets derived from lignocellulosic materials owing to the renewable nature of the biomass utilized. Beyond the parameters established by the Indonesian National Standard, it is crucial to understand the changes in mass and thermal properties. This understanding is essential for analyzing the thermal stability and degradation of bio-pellets. The bio-pellets were synthesized from various compositions of Gamal ( Gliricidia sepium ), Lamtoro ( Leucaena leucocephala ), and Coffee ( Coffea canephora ) husk in ratios (Gamal/G: Lamtoro/L: Coffee husk/C) of 0:1:1, 1:0:1, 1:1:0, 1:1:2, 2:1:1, and 1:2:1 at temperatures of 180 °C and 225 °C, with processing durations of 3 and 5 min. These diverse bio-pellet compositions were evaluated for their proximate values, mineral contents, and calorific values, according to the Indonesian National Standard (SNI 8675-2018). The composition with the highest calorific value (1:1:2) was subjected to thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results showed that the bio-pellets met the SNI 8675-2018 requirements for density (0.90–1.12 g/cm 3 ), moisture content (4.24–7.51%), volatile matter (68.13–76.81%), fixed carbon content (20.50–25.85%), calorific value (17.8–20.8 MJ/kg), Na 2 O content (0.014–0.046%), and K 2 O content (0.96–2.52%). However, the ash content (2.54–6.13%) and sulfur content (0.05–0.13%) did not meet the standards in some samples, while none of the samples met the requirements for Cl content (0.33–0.54%). TGA and DSC analyses revealed variations in mass and thermal properties owing to differences in temperature and processing time, which affected the thermal stability of the bio-pellets. These findings provide insights into the temperature and decomposition rate of bio-pellets, which can inform the future development of lignocellulose-based bio-pellets as renewable energy sources.Keywords
Funding Information
- the LPPM of Hasananuddin University (1811/UN4.22/PT.01.03/2023)
- the RIIM LPDP Grant and BRIN (33/IV/KS/05/2023)
This publication has 51 references indexed in Scilit:
- Unlocking Power: Impact of Physical and Mechanical Properties of Biomass Wood Pellets on Energy Release and Carbon Emissions in Power SectorWaste and Biomass Valorization, 2024
- Quality assessment of biomass pellets available on the market; example from PolandEnvironmental Science and Pollution Research, 2024
- Physico-chemical characterization study of coffee husk for feasibility assessment in fluidized bed gasification processEnvironmental Science and Pollution Research, 2021
- Characterization and quality analysis of wood pellets: effect of pelletization and torrefaction process variables on quality of pelletsBiomass Conversion and Biorefinery, 2021
- Upgrading of biomass pellets by torrefaction and its influence on the hydrophobicity, mechanical property, and fuel qualityBiomass Conversion and Biorefinery, 2020
- Physical and Combustion Properties of Binder-Assisted Hydrochar Pellets from Hydrothermal Carbonization of Tobacco StemWaste and Biomass Valorization, 2019
- A review of important considerations in the compression molding process of short natural fiber compositesThe International Journal of Advanced Manufacturing Technology, 2019
- Experimental methods in chemical engineering: Thermogravimetric analysis—TGAThe Canadian Journal of Chemical Engineering, 2019
- High moisture corn stover pelleting in a flat die pellet mill fitted with a 6 mm die: physical properties and specific energy consumptionEnergy Science & Engineering, 2015
- Thermogravimetric studies of the behavior of wheat straw with added coal during combustionBiomass and Bioenergy, 2009