The Estimated Temperature of the Semiconductor Diode Junction on the Basis of the Remote Thermographic Measurement
Open Access
Abstract
The value of a semiconductor’s diode temperature determines the correct operation of this element and its useful lifetime. One of the methods for determining the die temperature of a semiconductor diode is through the use of indirect thermographic measurements. The accuracy of the thermographic temperature measurement of the diode case depends on the prevailing conditions. The temperature of the mold body (the black part of the diode case made of epoxy resin) depends on the place of measurement. The temperature of the place above the die is closer to the die temperature than the temperature of mold body fragments above the base plate. In addition, the difficulty of its thermographic temperature measurement increases when the surface whose temperature is being measured is in motion. Then, the temperature measured by thermography may not apply to the warmest point in the case where the die temperature is determined. Information about the difference between temperatures of the different parts of the mold body and the die may be important. For this reason, it was decided to check how much the temperature measurement error of the die diode changes if the temperature of the diode case is not measured at the point that is above the die.Keywords
Funding Information
- Ministry of Education and Science of Poland (0212/SBAD/0593, 0212/SBAD/0595)
This publication has 32 references indexed in Scilit:
- Investigation and modelling of work roll temperature in induction heating by finite element methodJournal of the Southern African Institute of Mining and Metallurgy, 2018
- Determination of forced convection coefficient over a flat side of coil2017
- Thermal analysis of advanced microelectronic devices using thermoreflectance thermography2016
- Macro‐ to Microscale Heat Transfer2014
- Transient thermal mechanical analyses using a face-based smoothed finite element method (FS-FEM)International Journal of Thermal Sciences, 2013
- Influence of Angle of View on Temperature Measurements Using Thermovision CameraIEEE Sensors Journal, 2010
- Systematic and generic construction of shape functions for p-adaptive meshes of multidimensional finite elementsComputer Methods in Applied Mechanics and Engineering, 2009
- Convection Heat Transfer and Flow Calculations Suitable for Electric Machines Thermal ModelsIEEE Transactions on Industrial Electronics, 2008
- Temperature measurements of semiconductor devices - a review2004
- Emissivity measurements for Nextel Velvet Coating 811-21 between -36 °C and 82 °CHigh Temperatures-High Pressures, 2001