On $V_{{\text{ce}}}$ Method: In Situ Temperature Estimation and Aging Detection of High-Current IGBT Modules Used in Magnet Power Supplies for Particle Accelerators
- 5 April 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (1) , 551-560
Abstract
Magnet power supplies used in particle accelerators are a specialized application of power electronics that require long lifetime operation with no unscheduled interruptions and high output current precision. In this paper, the V ce method with sensing current is considered for the estimation of the junction temperature and the aging detection of high-current insulated gate bipolar transistor (IGBT) modules used in this specialized application. First, sensitivity analysis of the sensing current and the gate- emitter voltage are documented to quantify their impact on the precision of the V ce method for high-current modules independently of the application of interest. Two measuring circuits offering ease of calibration and reduced number of components are proposed but their applicability is not limited to this application. Their performance is tested on a 1.6 kA IGBT module that exhibits the highest current ratings documented for the V ce method with sensing current. The test is carried out at a switching frequency of 6.5 kHz using an experimental set-up that emulates a phase leg of the considered power supply. The V ce method with sensing current is evaluated for the aging detection of high-current IGBT modules in general and its effectiveness for the specialized application is verified experimentally.Keywords
This publication has 21 references indexed in Scilit:
- Online temperature estimation of a high-power 4.5 kV IGBT module based on the gate-emitter threshold voltage2015
- IGBT Junction Temperature Measurement via Peak Gate CurrentIEEE Transactions on Power Electronics, 2015
- Application of Kalman Filter to Estimate Junction Temperature in IGBT Power ModulesIEEE Transactions on Power Electronics, 2015
- Junction Temperature Measurement of IGBTs Using Short Circuit Current as a Temperature Sensitive Electrical Parameter for Converter Prototype EvaluationIEEE Transactions on Industrial Electronics, 2014
- Improving Power Converter Reliability: Online Monitoring of High-Power IGBT ModulesIEEE Industrial Electronics Magazine, 2014
- Online Vce measurement method for wear-out monitoring of high power IGBT modules2013
- Evaluation of $V_{\rm ce}$ Monitoring as a Real-Time Method to Estimate Aging of Bond Wire-IGBT Modules Stressed by Power CyclingIEEE Transactions on Industrial Electronics, 2012
- Ageing and Failure Modes of IGBT Modules in High-Temperature Power CyclingIEEE Transactions on Industrial Electronics, 2011
- New technique for the measurement of the static and of the transient junction temperature in IGBT devices under operating conditionsMicroelectronics Reliability, 2006
- Application of median filtering to noisy dataCanadian Journal of Chemistry, 1995