Electrochemical properties of micron-sized, spherical, meso- and macro-porous Co3O4 and CoO–carbon composite powders prepared by a two-step spray drying process
Authors:
- 21 February 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (9) , 4789-4795
Abstract
Micron-sized, spherical, meso- and macro-porous Co3O4 and CoO–carbon composite powders were prepared via a simple two-step spray drying process. The CoO–carbon composite powders, in which homogeneous mixing of the metal oxide and carbon components was achieved using the first spray drying process, were wet milled to produce the slurry for the second spray drying process. Co3O4 and CoO–carbon composite powders with mean particle sizes of 4.4 and 4.7 μm were respectively obtained by spray-drying the slurry after post-treatment at 400 °C under air and nitrogen atmospheres. Meso- and macro-pores were uniformly distributed inside the Co3O4 and CoO–carbon composite powders. The CoO–carbon composite powders exhibited discharge capacities of 882 and 855 mA h g−1 at a high constant current density of 1400 mA g−1 for the 2nd and 100th cycles. The discharge capacities of the Co3O4 powders at the 2nd and 100th cycles were 970 and 644 mA h g−1. With stepwise increment in the current density from 500 to 5000 mA g−1, the discharge capacities of the CoO–carbon composite powders decreased slightly from 985 to 698 mA h g−1. The superior rate and cycling performances of the CoO–carbon composite powders are ascribed to their meso- and macro-porous structures and carbon components.Keywords
This publication has 56 references indexed in Scilit:
- Electrochemical properties of yolk–shell and hollow CoMn2O4 powders directly prepared by continuous spray pyrolysis as negative electrode materials for lithium ion batteriesRSC Advances, 2013
- Superior electrochemical properties of Co3O4 yolk–shell powders with a filled core and multishells prepared by a one-pot spray pyrolysisChemical Communications, 2013
- One-pot facile synthesis of Janus-structured SnO2–CuO composite nanorods and their application as anode materials in Li-ion batteriesNanoscale, 2013
- Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteriesNanoscale, 2012
- α-Fe2O3 Nanorods as Anode Material for Lithium Ion BatteriesThe Journal of Physical Chemistry Letters, 2011
- Fabrication of three-dimensional porous structured Co3O4 and its application in lithium-ion batteriesElectrochimica Acta, 2010
- Electrochemical deposition of porous Co3O4 nanostructured thin film for lithium-ion batteryJournal of Power Sources, 2008
- Characterization of electrolytic Co3O4 thin films as anodes for lithium-ion batteriesJournal of Power Sources, 2007
- α‐Fe2O3 Nanotubes in Gas Sensor and Lithium‐Ion Battery ApplicationsAdvanced Materials, 2005
- Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteriesNature, 2000