A Calibration Method for Enhancing Robot Accuracy Through Integration of Kinematic Model and Spatial Interpolation Algorithm
- 5 July 2021
- journal article
- research article
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (6)
Abstract
Industrial robots are finding their niche in the field of machining due to their advantages of high flexibility, good versatility, and low cost. However, limited by the low absolute positioning accuracy, there are still huge obstacles in high-precision machining processes such as grinding. Aiming at this problem, a compensation method combining analytical modeling for quantitative errors with spatial interpolation algorithm for random errors is proposed based on the full consideration of the source and characteristics of positioning errors. First, as for the quantitative errors, namely geometric parameter and compliance error in this paper, a kinematics-based error model is constructed taking the coupling effect of errors into consideration. Then avoiding the impact of random errors, the extended Kalman filtering (EKF) algorithm is adopted to identify the error parameters. Second, based on the similarity principle of spatial error, spatial interpolation algorithm is used to model the residual error caused by temperature, gear clearance, etc. Based on the spatial anisotropy characteristics of robot motion performance, an adaptive mesh division algorithm was proposed to balance the accuracy and efficiency of mesh division. Then, an inverse distance weighted interpolation algorithm considering the influence degree of different joints on the end position was established to improve the approximation accuracy of residual error. Finally, the rough-fine two-stage serial error compensation method was carried out. Experimental results show that the mean absolute positioning accuracy is improved from 1.165 mm to 0.106 mm, which demonstrates the effectiveness of the method in this paper.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (300102251503)
- National Science and Technology Major Project (2017-VII-0002-0095)
- Natural Science Foundation of Shaanxi Province (2020JQ-192)
This publication has 16 references indexed in Scilit:
- Posture optimization methodology of 6R industrial robots for machining using performance evaluation indexesRobotics and Computer-Integrated Manufacturing, 2017
- Efficiency evaluation of robots in machining applications using industrial performance measureRobotics and Computer-Integrated Manufacturing, 2017
- Positional error similarity analysis for error compensation of industrial robotsRobotics and Computer-Integrated Manufacturing, 2016
- An error-similarity-based robot positional accuracy improvement method for a robotic drilling and riveting systemThe International Journal of Advanced Manufacturing Technology, 2016
- Stiffness-oriented posture optimization in robotic machining applicationsRobotics and Computer-Integrated Manufacturing, 2015
- Optimal pose selection for calibration of planar anthropomorphic manipulatorsPrecision Engineering, 2015
- A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural networkNeurocomputing, 2015
- Positional Error Estimation in Serial Link Manipulator Under Joint Clearances and BacklashJournal of Mechanisms and Robotics, 2013
- The Jacobian condition number as a dexterity index in 6R machining robotsRobotics and Computer-Integrated Manufacturing, 2012
- Optimal Selection of Measurement Configurations for Stiffness Model Calibration of Anthropomorphic ManipulatorsApplied Mechanics and Materials, 2012