Screen Printed Pb3O4 Films and Their Application to Photoresponsive and Photoelectrochemical Devices
Open Access
Abstract
A new and simple procedure for the deposition of lead (II, IV) oxide films by screen printing was developed. In contrast to conventional electrochemical methods, films can be also deposited on non-conductive substrates without any specific dimensional restriction, being the only requirement the thermal stability of the substrate in air up to 500 °C to allow for the calcination of the screen printing paste and sintering of the film. In this study, films were exploited for the preparation of both photoresponsive devices and photoelectrochemical cell photoanodes. In both cases, screen printing was performed on FTO (Fluorine-Tin Oxide glass) substrates. The photoresponsive devices were tested with I-V curves in dark and under simulated solar light with different irradiation levels. Responses were evaluated at different voltage biases and under light pulses of different durations. Photoelectrochemical cells were tested by current density–voltage (J-V) curves under air mass (AM) 1.5 G illumination, incident photon-to-current efficiency (IPCE) measurements, and electrochemical impedance spectroscopy.Keywords
This publication has 16 references indexed in Scilit:
- Electronic Properties of Copper(I) Thiocyanate (CuSCN)Advanced Electronic Materials, 2017
- Electrochemical Synthesis of PbO2, Pb3O4 and PbO Films on a Transparent Conducting SubstrateElectrochimica Acta, 2015
- Photoinduced Reactions between Pb3O4 and Organic Dyes in Aqueous Solution under Visible LightInorganic Chemistry, 2012
- Surfactant free hydrothermal formation of Pb3O4 nanorodsJournal of Alloys and Compounds, 2008
- Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%Thin Solid Films, 2008
- Selected-Control Synthesis of PbO2 and Pb3O4 Single-Crystalline NanorodsJournal of the American Chemical Society, 2003
- Efficient Photo-Hole Injection from Adsorbed Cyanine Dyes into Electrodeposited Copper(I) Thiocyanate Thin FilmsChemistry of Materials, 1995
- Preparation of a thin film of Pb3O4 by thermal treatment of PbO2 filmThin Solid Films, 1991
- Characterization of Pb3O4 films by electrochemical techniquesBulletin of Materials Science, 1986
- Saur Viddyut Kosh IV: Study of a rechargeable solar battery with n-Pb3O4 electrodesSolar Cells, 1984