Properties of Copper Layers Deposited by Electroplating on an Agglomerated Copper Seed Layer
Authors:
- Tohru HaraTHTohru Hara
- Hiroki ToidaHTHiroki Toida
- 1 January 2002
- journal article
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 5 (10) , C102-C105
Abstract
This paper describes the properties and adhesion strength of electroplated copper layers deposited onto two different seed layers. In a thin (10 nm) seed layer, which we term seed layer A, agglomeration occurs across the full thickness of the layer and a stress free or lower stress seed layer is formed with an annealing at 400°C. A highly (111)-oriented copper conductive layer is the result of this electroplating strategy. The adhesion strength is so high (40 gf) that no peeling occurs during chemical mechanical planarization (CMP) in this layer. When the layer is electroplated onto a thick (100 nm) seed layer, which we term seed layer B, agglomeration only occurs at the interface with Ta barrier layer with this annealing. Although a smooth copper layer still remains at the surface, a weakly (111)-orientated copper layer is electroplated. The adhesion strength of this type of copper layer is as low as 10 gf so that peeling can easily occur both during annealing and CMP. Correlation is found between the critical pressure defined by the pressure occurring of the peeling in the copper layers during the CMP with adhesion strength. © 2002 The Electrochemical Society. All rights reserved.Keywords
This publication has 8 references indexed in Scilit:
- Characterization of the Cu/barrier metal interface for copper interconnects2002
- Properties of Copper Interconnection Layers Deposited by Electroplating Using a Copper Hexafluorosilicate Electrolytic SolutionElectrochemical and Solid-State Letters, 2002
- Improved Barrier and Adhesion Properties in Sputtered TaSiN Layer for Copper InterconnectsElectrochemical and Solid-State Letters, 2002
- Stray Thoughts on the IT-RevolutionIEEJ Transactions on Electronics, Information and Systems, 2001
- Control of Agglomeration on Copper Seed Layer Employed in the Copper InterconnectionElectrochemical and Solid-State Letters, 2001
- Chemical Mechanical Planarization of Copper and Barrier Layers by Manganese(IV) Oxide SlurryElectrochemical and Solid-State Letters, 2001
- Stress in Copper Seed Layer Employing in the Copper InterconnectionElectrochemical and Solid-State Letters, 2001
- Formation and Thermochromism of V O2Films Deposited by RF Magnetron Sputtering at Low Substrate TemperatureJapanese Journal of Applied Physics, 1994