Effect comparative composition of geopolymer based-bottom ash and brick ash to be applied as refractories
Open Access
- 1 January 2023
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2719 (1) , 030019
Abstract
The content of elements and compounds contained in bottom ash such as SiO2, Al2O3, Fe2O3, CaO, MgO, TiO2, and C makes bottom ash has ceramic and pozzolanic properties, while bricks ash that contains most of the SiO2 compounds allow both to be used as insulated, cemented and geopolymer compounds. In this study, geopolymer built bottom ash and bricks ash for a refractory application using the release solution NaOH and Na2SiO3 (8M), with an S/L ratio (5.4 g/ml), curing at 110°C for 12 hours with comparative variations in composition. The mechanical properties test indicates that adding the composition of the bricks would increase the mechanical properties such as PLC, MOR, CCS, and testing of PCE directed by the maximum value of 1398 °C. Microstructure testing is known that the majority of geopolymers contain the silicon oxide compound (SEM-EDAX indicates the existence of the dominant element O and Si). This was supported by the XRD test that adding bricks ash caused the appearance of silicon oxide (SiO2) compounds and the FTIR test results indicating the presence of polysilicate on a 3398.10 wavelength. The dominant levels of SiO2 indicate that the geopolymer generated is acid-refractory.Keywords
This publication has 9 references indexed in Scilit:
- An investigation of bottom ash as a pozzolanic materialConstruction and Building Materials, 2018
- Pembuatan Refraktori Dari Refraktori Bekas Pakai Kiln Dan Flyash Batubara Dengan Variasi Tekanan Greenbody [Recycling of Used Refractory of Kiln and Coal Fly Ash by Various of Greenbody Presure]Metalurgi, 2018
- Use of ground coal bottom ash as cement constituent in concretes exposed to chloride environmentsJournal of Cleaner Production, 2018
- Geopolymers obtained from bottom ash as source of aluminosilicate cured at room temperatureConstruction and Building Materials, 2017
- Performance of bricks made using fly ash and bottom ashConstruction and Building Materials, 2015
- Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortarMaterials & Design (1980-2015), 2014
- Production geopolymers by Portland cement: Designing the main parameters’ effects on compressive strength by Taguchi methodMaterials & Design (1980-2015), 2012
- Synthesis of ferronickel slag-based geopolymersMinerals Engineering, 2009
- Botox ruling imminentNursing Standard, 2007