Influence of Profile Specification on International Roughness Index
Author:
- 1 June 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Infrastructure Systems
- Vol. 25 (2)
Abstract
This paper addressed an important question of selection of wheel path(s) for International Roughness Index (IRI) or Mean Roughness Index (MRI) estimation. Twenty-one IRI/MRI alternatives of wheel path position(s) (single path and two parallel paths) were estimated. Sixteen parallel records of longitudinal profiles and a road network with a total length of approximately 12,000 km were processed. The correlation between simulated vehicle vibration response and IRI/MRI alternatives was evaluated. Vibration response was calculated on a passenger full-car model. The influence of vibration response category (ride comfort and vehicle controllability and safety), road category (motorways, first-class roads, and second-class roads), and report interval of IRI (20 and 100 m) on the results was analyzed. The best correlation was established for parallel profiles that were in the lateral distance of 15–30 cm of vehicle excitation profiles. A stronger correlation was identified for single path near the right (outer) wheel path for motorways. A weaker correlation was identified for the left (inner) wheel path or two parallel profiles localized further than 30 cm from excitation profiles. The same correlation coefficients were calculated for most of the IRI/MRI alternatives and the 100-m report interval of IRI.Keywords
This publication has 10 references indexed in Scilit:
- Road Roughness Limit Values Based on Measured Vehicle VibrationJournal of Infrastructure Systems, 2017
- Energy-harvesting potential of automobile suspensionVehicle System Dynamics, 2016
- Investigation of ride comfort limits on urban asphalt concrete pavementsInternational Journal of Pavement Engineering, 2016
- Analytical Evaluation of Ride Comfort on Asphalt Concrete PavementsJournal of Testing and Evaluation, 2016
- International Roughness Index specifications around the worldRoad Materials and Pavement Design, 2016
- Influence of tyre–road contact model on vehicle vibration responseVehicle System Dynamics, 2015
- SEMI-ACTIVE SUSPENSION INFLUENCE ON COMFORT SENSATION OF A VEHICLE OCCUPANTAgricultural Engineering / Žemės ūkio Inžinerija, 2014
- Correlation among Road Unevenness Indicators and Vehicle Vibration ResponseJournal of Transportation Engineering, 2013
- Assessment of Interaction Between Road Roughness and Heavy VehiclesTransportation Research Record: Journal of the Transportation Research Board, 2003
- THE PREDICITON OF SEAT TRANSMISSIBILITY FROM MEASURES OF SEAT IMPEDANCEJournal of Sound and Vibration, 1998