Use of AC Impedance Technique in Studies on Steel in Concrete in Immersed Conditions
Authors:
- D. G. JohnDJD. G. John
- P. C. SearsonPSP. C. Searson
- J. L. DawsonJDJ. L. Dawson
- 1 January 1981
- journal article
- Published by SAGE Publications in British Corrosion Journal
- Vol. 16 (2) , 102-106
Abstract
The validity of the ac impedance technique has been tested using polished steel samples cast in concrete cubes, followed by immersion in oxygen-saturated sea water and distilled water. In order to accelerate the corrosion processes the concrete used was very porous with a low cover thickness and comparisons were made with samples of pre-rusted steel specimens. The impedance results show that, as well as estimating the corrosion rates, information related to the surface film on the steel may also be obtained. The data are in accord with corrosion potential measurements; The results highlight a problem inherent in dc polarisation techniques when applied to the study of corrosion of reinforcing steel in concrete, namely, that steady state data are only obtained many hours after the initial measuring perturbation.Keywords
This publication has 3 references indexed in Scilit:
- Corrosion Rates from Impedance Measurements: An IntroductionBritish Corrosion Journal, 1980
- Corrosion Monitoring using Polarisation Resistance Measurements: II. Sources of errorBritish Corrosion Journal, 1976
- On the impedance of galvanic cells: I. TheoryRecueil des Travaux Chimiques des Pays-Bas, 1960