The crystallinity of chemically bonded PA‐PTFE‐oil compounds by X‐ray diffraction and DSC
Open Access
- 28 March 2023
- journal article
- research article
- Published by Wiley in Journal of Polymer Science
- Vol. 61 (16) , 1828-1842
Abstract
One of the major shortcomings of compounding polyamide (PA), polytetrafluoroethylene (PTFE), and olefinic oils is the fact that they are incompatible. To overcome this issue, using energy radiation in the presence of oxygen leads to the breakage of the PTFE chain to generate hydrophilic functional groups (COF, COOH) and peroxy radicals. The created functional groups and radicals can be used to induce a chemical bond between PA and PTFE as well as between PTFE and olefinic oil molecules. In addition, the hardness of compounds significantly influences the application of materials as solid‐lubricant. It is well known that crystallinity affects the hardness of materials. In the presented study, the effects of the chemical bonding PA‐PTFE/PA‐PTFE‐oil on the crystallization behavior of various types of PA in chemically bonded PA‐PTFE‐oil‐chemically bonded compounds, which were prepared by reactive two‐step extrusion, were investigated via DSC and X‐ray diffraction. The crystallite size of PA46 and PA66 in PA‐PTFE‐chemically bonded (cb) compounds was significantly increased compared with pure PA. At the same time, the d‐spacings of the PA segment in PA‐PTFE compounds were significantly narrower. Due to the chemical coupling, the compounds showed a slight change in hardness compared with pure PA.Keywords
This publication has 33 references indexed in Scilit:
- Polyamide 46/multi-walled carbon nanotube nanocomposites with enhanced thermal, electrical, and mechanical propertiesComposites Part A: Applied Science and Manufacturing, 2012
- Tribological properties of PTFE composites with addition of PA6Materials Technology, 2010
- Friction and wear properties of PTFE composites filled with PA6Polymer Composites, 2009
- RETRACTED: Friction and Wear Properties of PA6-reinforced PTFE CompositesJournal of Reinforced Plastics and Composites, 2009
- Mechanical and tribological properties of PA66/PPS blend. II. Filled with PTFEJournal of Applied Polymer Science, 2006
- Reibungs‐ und Verschleißverhalten von chemisch gekoppelten PTFE‐PA‐6.6‐MaterialienMaterialwissenschaft und Werkstofftechnik, 2004
- Modification of perfluorinated polymers by high-energy irradiationJournal of Fluorine Chemistry, 2004
- Crystal structure and morphology of biaxially oriented polyamide 12 filmsJournal of Polymer Science Part B: Polymer Physics, 2002
- Chain-Folded Lamellar Crystals of Aliphatic Polyamides. Comparisons between Nylons 4 4, 6 4, 8 4, 10 4, and 12 4Macromolecules, 1996
- Crystal structure of nylon 12Journal of Polymer Science: Polymer Physics Edition, 1973