Path Planning of 6-DOF Venipuncture Robot Arm Based on Improved A-star and Collision Detection Algorithms
Authors:
- 1 December 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2971-2976
Abstract
In this paper, we use a compact 6 degree-of- freedom (DOF) robot arm as the actuator of the venipuncture system. Aiming at the robot arm’s requirements for speed and smoothness and considering that the robot arm may collide with obstacles in the course of movement,we simplify the model of the robot arm and obstacles according to the geometry of the robot arm and obstacles in the environment. Then we proposed an improved A-star algorithm and a three-dimensional (3D) collision detection algorithm, which can plan a collision-free optimal path for the blood taking needle fixed in the end of the robot arm, so that the blood taking needle can penetrate into the target point of the venous vessel continuously,smoothly and accurately driven by the robot arm. The simulation and actual path planning experiments indicate that the proposed path planning method is effective and feasible.Keywords
This publication has 9 references indexed in Scilit:
- A robotic system for investigation on mis-alignment force of needle and vein needle insertion into blood vessel2017
- 6R Serial Manipulator Space Path Planning Based on RRT2016
- The System Design and Evaluation of a 7-DOF Image-Guided Venipuncture RobotIEEE Transactions on Robotics, 2015
- A RRT-based collision-free and occlusion-free path planning method for a 7DOF manipulator2014
- Profile: Veebot [Resources_Start-ups]IEEE Spectrum, 2013
- Development of a configuration space motion planner for robot in dynamic environmentRobotics and Computer-Integrated Manufacturing, 2009
- Real-time range acquisition by adaptive structured lightIEEE Transactions on Pattern Analysis and Machine Intelligence, 2006
- Fuzzy behavior-based motion planning for the PUMA robot2002
- A Kinematic Notation for Lower-Pair Mechanisms Based on MatricesJournal of Applied Mechanics, 1955