Effects of Bi Addition on the Microstructure and Mechanical Properties of Nanocrystalline Ag Coatings
Open Access
Abstract
In this study we investigated the effects of Bi addition on the microstructure and mechanical properties of an electrodeposited nanocrystalline Ag coating. Microstructural features were investigated with transmission electron microscopy (TEM). The results indicate that the addition of Bi introduced nanometer-scale Ag-Bi solid solution particles and more internal defects to the initial Ag microstructures. The anisotropic elastic-plastic properties of the Ag nanocrystalline coating with and without Bi addition were examined with nanoindentation experiments in conjunction with the recently-developed inverse method. The results indicate that the as-deposited nanocrystalline Ag coating contained high mechanical anisotropy. With the addition of 1 atomic percent (at%) Bi, the anisotropy within Ag-Bi coating was very small, and yield strength of the nanocrystalline Ag-Bi alloy in both longitudinal and transverse directions were improved by over 100% compared to that of Ag. On the other hand, the strain-hardening exponent of Ag-Bi was reduced to 0.055 from the original 0.16 of the Ag coating. Furthermore, the addition of Bi only slightly increased the electrical resistivity of the Ag-Bi coating in comparison to Ag. Results of our study indicate that Bi addition is a promising method for improving the mechanical and physical performances of Ag coating for electrical contacts.Keywords
This publication has 59 references indexed in Scilit:
- Combinatorial Study of Gradient Ag–Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical PropertiesACS Applied Materials & Interfaces, 2016
- Structure evolution and phase change in Ag–5.1at.% Bi alloy during mechanical alloyingActa Materialia, 2011
- Synthesis of Ag–TiO2composite nano thin film for antimicrobial applicationNanotechnology, 2011
- A Facile and Novel Synthesis of Ag–Graphene‐Based NanocompositesSmall, 2009
- Structure and properties of electrodeposited silver–bismuth alloysJournal of Applied Electrochemistry, 2004
- Effect of electrolysis conditions on the deposition of silver–bismuth alloysJournal of Applied Electrochemistry, 2003
- Microstructure, hardness and electrical properties of silver-based refractory contact materialsMaterials & Design (1980-2015), 2003
- Electrodeposition and characterisation of Ag–ZrO2 electroplated coatingsSurface and Coatings Technology, 2001
- Electrical effects of fretting connector contact materials: A reviewWear, 1985
- Calculated electrical conductivity and thermopower of silver-palladium alloysPhysical Review B, 1984