Mechanism of solid-state reaction for fabrication of new glassy V45Zr22Ni22Cu11alloy powders and subsequent consolidation
- 1 October 2003
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 18 (10) , 2435-2445
Abstract
A single glassy phase of V45Zr22Ni22Cu11alloy powders was synthesized by milling the elemental alloying powders in an argon atmosphere using a low-energy ball-milling technique. During the early and intermediate stages of milling, the atoms of Zr, Ni, and Cu migrated and diffused into the V (base material) lattice to form a body-centered-cubic (bcc) solid-solution, which transformed into a glassy phase with the same composition upon annealing at 850 K for 300 s in an argon atmosphere differential scanning calorimeter (thermally-enhanced glass formation reaction). As the milling time increased, the powders were subjected to continuous defects and lattice imperfections that led to a gradual change in the free energy so that solid-solution phase was transformed (mechanically enhanced glass formation reaction) to another metastable phase (glassy). Toward the end of the milling processing time, the bcc solid-solution transformed completely into a single glassy phase with the same composition. The glass-transition temperature, the crystallization temperature, and the enthalpy change of crystallization of the fabricated glassy powders were 741 K, 884 K, and −2.18 kJ/mol, respectively. This fabricated glassy alloy showed a wide supercooled liquid region (143 K) of metallic glassy alloy. The glassy powders were compacted in an argon gas atmosphere at 864 K with a pressure of 780 MPa using a hot-pressing technique. The consolidated sample was fully dense (above 99.2°) and maintained its chemically homogeneous glassy structure. The Vickers microhardness of the consolidated glassy V45Zr22Ni22Cu11alloy was measured and found to be in the range between 6.89 GPa to 7.02 GPa.Keywords
This publication has 42 references indexed in Scilit:
- High Strength Magnesium-based Glass Matrix CompositesMATERIALS TRANSACTIONS, 2002
- Investigation of Amorphization in an Intermetallic Powder Mixture of Bulk Glass Forming CompositionMaterials Science Forum, 1998
- Microstructure investigations on explosive TiNi(or Ni)/TiC-composite-formation reaction during mechanical alloyingActa Materialia, 1996
- Metallic GlassesScience, 1995
- Thermodynamic and kinetic requirements for inverse meltingMaterials Science and Engineering: A, 1994
- Mechanical properties of amorphous alloy compacts prepared by a closed processing systemScripta Metallurgica et Materialia, 1993
- Calorimetric characterization of the amorphization process for rod milled Al50Nb50 alloy powdersScripta Metallurgica et Materialia, 1991
- Rod milling for solid-state formation of Al30Ta70 amorphous alloy powderJournal of the Less Common Metals, 1990
- Calorimetry study of the synthesis of amorphous Ni-Ti alloys by mechanical alloyingJournal of the Less Common Metals, 1988
- The thermodynamics of inverse meltingJournal of the Less Common Metals, 1988