The Effect of Thermal Processing and Chemical Composition on Secondary Carbide Precipitation and Hardness in High-Chromium Cast Irons
Open Access
- 3 February 2020
- journal article
- research article
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 14 (3) , 755-765
Abstract
The excellent abrasion resistance of high-chromium cast irons (HCCIs) is given by an optimal combination of hard eutectic and secondary carbides (SC) and a supporting matrix. The tailoring of the microstructure is performed by heat treatments (HTs), with the aim to adjust the final properties (such as hardness and abrasion resistance). In this work, the influence of chemical composition on the microstructure and hardness of HCCI_26%Cr is evaluated. An increase in the matrix hardness was detected after HTs resulting from combining precipitation of M23C6 SC during destabilization, and austenite/martensite transformation during quenching. Kinetic calculations of the destabilization process showed that M7C3 secondary carbides are the first to precipitate during heating, reaching a maximum at 850 °C. During subsequent heating up to 980 °C and holding at this temperature, they transformed completely to M23C6. According to the MatCalc simulations, further precipitation of M23C6 occurred during cooling, in the temperature range 980–750 °C. Both phenomena were related to experimental observations in samples quenched after 0-, 30-, 60- and 90-min destabilization, where M23C6 SC were detected together with very fine SC precipitated in areas close to eutectic carbides.Keywords
This publication has 25 references indexed in Scilit:
- High Chromium Cast Irons: Destabilized-Subcritical Secondary Carbide Precipitation and Its Effect on Hardness and Wear PropertiesJournal of Materials Engineering and Performance, 2018
- Effect of Destabilizing Heat Treatment on Solid-State Phase Transformation in High-Chromium Cast IronsMetallurgical and Materials Transactions A, 2013
- The nature of stacking faults within iron-chromium carbide of the type (Fe,Cr)7C3Journal of Alloys and Compounds, 2010
- Variations in microstructure of high chromium cast irons and resultant changes in resistance to wear, corrosion and corrosive wearWear, 2009
- Microstructural Modifications of As-Cast High-Chromium White Iron by Heat TreatmentJournal of Materials Engineering and Performance, 2008
- Metal matrix composites – From science to technological significanceComposites Science and Technology, 2005
- XRD and electron microscope study of an as-cast 26.6% chromium white iron microstructureMaterials Chemistry and Physics, 2004
- Scouring erosion resistance of metallic materials used in slurry pump serviceWear, 2004
- Secondary carbide precipitation in an 18 wt%Cr-1 wt% Mo white ironJournal of Materials Science, 1996
- Structure, nucleation, growth and morphology of secondary carbides in high chromium and Cr-Ni white cast ironsJournal of Materials Science, 1992