Effect of the quasi-continuous equal-channel angular pressing on the structure and functional properties of Ti–Ni-based shape-memory alloys
- 1 March 2017
- journal article
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 118 (3) , 279-287
Abstract
The effect of severe plastic deformation by equal-channel angular pressing (ECAP) under normal and quasi-continuous regimes on the structure and the mechanical and functional properties of a Ti–50.2 at % Ni shape-memory alloy (SMA) has been studied. ECAP was carried out at an angle of intersection of channels of 120° in the normal regime with heating between passes at 450°C for 20 passes and in the quasi-continuous regime at the temperature of 400°C for three, five, and seven passes. The hot screw rolling with subsequent annealing at 750°C for 30 min and cooling in water was used as a control treatment (CT). A mixed submicrocrystalline and nanosubgrained structure was formed. The increase in the number of passes from three to seven led to a decrease in the average size of structural elements from 115 ± 5 to 103 ± 5 nm and to an increase in the fraction of grains/subgrains having a size less than 100 nm. After ECAP (seven passes) and post-deformation annealing at the temperature of 400°C for 1 h, a completely recoverable strain was 9.5%; after normal ECAP, 7.2%; after CT, 4.0%.Keywords
This publication has 19 references indexed in Scilit:
- Twist channel multi-angular pressing (TCMAP) as a new SPD process: Numerical and experimental studyMaterials Science and Engineering: A, 2014
- Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawingMaterials Science and Engineering: A, 2013
- Structure and properties of Ti–Ni-based alloys after equal-channel angular pressing and high-pressure torsionMaterials Science and Engineering: A, 2008
- Studies of composition, deformation temperature and pressure effects on structure formation in severely deformed TiNi-based alloysMaterials Science and Engineering: A, 2006
- Principles of equal-channel angular pressing as a processing tool for grain refinementProgress in Materials Science, 2006
- Effect of Equal Channel Angular Pressing and Repeated Rolling on Structure, Phase Transformations and Properties of TiNi Shape Memory AlloysMaterials Science Forum, 2006
- Structure and Properties of the Ti–50.0 at%Ni Alloy after Strain Hardening and Nanocrystallizing Thermomechanical ProcessingMATERIALS TRANSACTIONS, 2006
- Alloy composition, deformation temperature, pressure and post-deformation annealing effects in severely deformed Ti–Ni based shape memory alloysActa Materialia, 2005
- Thermomechanical Treatment of Ti-Ni-Based Shape Memory Alloys Using Severe Plastic DeformationMaterials Science Forum, 2003
- Materials science: Nanomaterial advantageNature, 2002