Internal Reforming of Methane at Ni/YSZ and Ni/CGO SOFC Cermet Anodes
- 3 August 2006
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 6 (3-4) , 307-313
Abstract
The internal reforming of methane on Ni/CGO and Ni/YSZ anodes was investigated with single cells operated at steam to carbon ratios from 0 to 3 and at temperatures of 800 °C and 950 °C. The incorporation of gas extraction ports allowed the measurement of the local gas composition in the anode gas compartment by gas chromatography. The methane conversion is presented as a function of feed gas composition, temperature, gas flow velocity, and electrical load. The impact of the anode material on the reforming reaction and on cell performance is shown. Methane conversion along the Ni/CGO anode was calculated with a one‐dimensional model; the required kinetic parameters were obtained by data fitting.Keywords
This publication has 10 references indexed in Scilit:
- Recent Advances in Materials for Fuel CellsAnnual Review of Materials Research, 2003
- Development of a multilayer anode for solid oxide fuel cellsSolid State Ionics, 2002
- Oxidation of H2, CO and methane in SOFCs with Ni/YSZ-cermet anodesSolid State Ionics, 2002
- Solid oxide fuel cellsChemical Society Reviews, 2002
- Catalytic activity of Ni–YSZ–CeO2 anode for the steam reforming of methane in a direct internal-reforming solid oxide fuel cellJournal of Power Sources, 2001
- The six-flow reactor technology A review on fast catalyst screening and kinetic studiesCatalysis Today, 2000
- Reforming of natural gas in solid oxide fuel cell systemsJournal of Power Sources, 1998
- Advances in catalysts for internal reforming in high temperature fuel cellsJournal of Power Sources, 1998
- Catalytic aspects of the steam reforming of hydrocarbons in internal reforming fuel cellsCatalysis Today, 1997
- Methane/steam reforming kinetics for solid oxide fuel cellsJournal of Power Sources, 1994