Effect of stress relaxation on the evolution of residual stress during heat treatment of Ti-6Al-4V
Open Access
- 12 October 2020
- journal article
- research article
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 321, 11001
Abstract
Titanium alloys, such as Ti-6Al-4V, are extensively used in critical aerospace applications. Heat treatments are often conducted during forging processes to produce final microstructures which exhibit advantageous mechanical properties. However, high thermal gradients present during processing may lead to the generation of undesirable levels of residual stress. Stress relief can be achieved by conducting aging or annealing treatments at elevated temperatures, yet there is limited quantitative understanding of how holding temperature affects the evolution of residual stress. Stress relaxation testing was conducted between 500-750°C and the resulting response was modified to describe creep strain. This was implemented in DEFORM™ finite element analysis software to model the evolution of residual stress during solution treatment followed by aging between 500-750°C, with comparison against solutions which did not consider creep strain. Stress relaxation phenomena was found to have an important impact on the reduction of residual stress and needs to be considered when carrying out thermo-mechanical processing at elevated temperatures.Keywords
This publication has 17 references indexed in Scilit:
- Thermo-metallo-mechanical modelling of heat treatment induced residual stress in Ti–6Al–4V alloyMaterials Science and Technology, 2019
- An Arrhenius equation-based model to predict the residual stress relief of post weld heat treatment of Ti-6Al-4V plateJournal of Manufacturing Processes, 2018
- Stress relaxation behaviour in IN718 nickel based superalloy during ageing heat treatmentsMaterials Science and Engineering: A, 2017
- Evolution of a modern mechanical testing and design standard for high temperature materialsMaterials Research Innovations, 2016
- On the mechanisms of superplasticity in Ti–6Al–4VActa Materialia, 2016
- Modeling and Simulation for the Stress Relaxation Behavior of Ti-6Al-4V at Medium TemperatureRare Metal Materials and Engineering, 2015
- Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4VProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014
- Internal-variable analysis of high-temperature deformation behavior of Ti–6Al–4V: A comparative study of the strain-rate-jump and load-relaxation testsMaterials Science and Engineering: A, 2013
- High-temperature deformation and grain-boundary characteristics of titanium alloys with an equiaxed microstructureMaterials Science and Engineering: A, 2008
- Residual stress. Part 1 – Measurement techniquesMaterials Science and Technology, 2001