Influence of bonding compression and air gap on the acoustic absorption of spunbond–resinated felt composites
Open Access
- 31 December 2025
- journal article
- Published by Politeknik Negeri Lhokseumawe in Jurnal POLIMESIN
- Vol. 23 (6) , 753-758
Abstract
Spunbond-resinated felt is a common composite material used for automotive purposes. Reducing vehicle noise requires lightweight, cost-effective sound-absorbing materials. This study focuses on researching more lightweight and low-cost materials through examining how bonding compression and an air gap affect the acoustic absorption of Spunbond–Resinated felt composites with varying grammage (800–1400 g/m²) and thickness (15–22 mm). The novelty of this research is in the use of lower grammage and the existence of an air gap compared with the existing product and previous study. Acoustic absorption tests were conducted using an impedance tube with air-gap depths of 0, 10, and 15 mm behind the samples. Additional tests were conducted on compressed samples, 50% of the original thickness, to observe the effect of increased density. Results show that felt with 1200 g/m² provides the best overall absorption. Thickness compression reduces absorption by approximately 13–23%, whereas the introduction of an air gap significantly enhances absorption, particularly for lower-grammage materials. Notably, an 800 g/m² felt combined with a 15 mm air gap outperformed a 1400 g/m² felt without an air gap. These findings demonstrate that appropriate grammage and air gap design can enhance sound absorption, enabling lighter materials such as 800–1000 g/m² felt to meet noise-reduction requirements.Keywords
This publication has 31 references indexed in Scilit:
- A survey of modern vehicle noise, vibration, and harshness: A state-of-the-artAin Shams Engineering Journal, 2024
- Investigation of the performance of needle-punched nonwoven fabrics using Triumfetta cordifolia and thermoplastic fibers, compared to other commercial bast fibers used in preformed biosourced compositesHeliyon, 2023
- Porous resin-bonded recycled denim composite as an efficient sound-absorbing materialApplied Acoustics, 2021
- Prediction of the acoustic effect of an interior trim porous material inside a rigid-walled car air cavity modelApplied Acoustics, 2020
- A study on acoustic characteristics of automotive magnesium composite dash panelApplied Acoustics, 2020
- Experimental Study on the Effect of Air Gap, Thickness, and Density on Acoustic Impedance and Sound Absorption of Stone Wool and Rubber Samples with Transfer Function MethodIranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2017
- Sound absorption and insulation functional composites2017
- Automotive Materials: An Experimental Investigation of an Engine Bay Acoustic PerformancesEnergy Procedia, 2016
- Sound and Noise: Measurement and Design Guidance2012
- Effects of material and treatment parameters on noise‐control performance of compressed three‐layered multifiber needle‐punched nonwovensJournal of Applied Polymer Science, 2011