3D simulation and analytical model of chemical heating during silicon wet etching in microchannels
Open Access
- 3 February 2016
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 681 (1) , 012035
Abstract
We investigate chemical heating of a Silicon-on-Glass (SOG) chip during a highly exothermic reaction of silicon etching in potassium hydroxide (KOH) solution in a microchannel of 100-micron width inside a 1x1 cm SOG chip. Two modeling approaches have been developed, implemented and compared. (1) A detailed 3D model is based on unsteady Navier-Stokes equations, heat and mass transfer equations of a laminar flow of viscous incompressible fluid in microchannel, coupled to the heat transfer equation in the solid chip. 3D simulation results predicted temperature distributions for different KOH flow rates and silicon etching areas. Microchannels of a small diameter do not heat the chip due to the insufficient chemical heating of the cold fluid, whereas large-area etching (large channel diameter and/or length) leads to local overheating that may have negative effects on the device performance and durability. (2) A simplified analytical model solves a thermal balance equation describing the heating by chemical reactions inside the microchannel and energy loss by free convection of air around the chip. Analytical results compare well with the 3D simulations of a single straight microchannel, therefore the analytical model is suitable for quick estimation of process parameters. For complex microstructures, this simplified approach may be used as the first approximation.Keywords
This publication has 5 references indexed in Scilit:
- Modeling chemical vapor deposition of silicon dioxide in microreactors at atmospheric pressureJournal of Physics: Conference Series, 2015
- Recent developments in microfluidic large scale integrationCurrent Opinion in Biotechnology, 2014
- Strategy for the Future in Terms of Research and Development in the Field of Nano and MicrotechnologyProcedia Technology, 2014
- Micromachining of buried micro channels in siliconJournal of Microelectromechanical Systems, 2000
- Etching in Microsystem Technology1999