Influence of organically modified clay mineral on domain structure and properties of segmented thermoplastic polyurethane elastomer
Authors:
- 22 November 2012
- journal article
- research article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 46 (3) , 217-232
Abstract
Segmented polyether–urethane/organically modified montmorillonite (O-MMT) nanocomposites were synthesized with poly(tetramethylene glycol) (PTMG), 4,4′-diphenylmethane diisocyanate (MDI), butane diol (BD), and a commercially available clay Cloisite-30B® (O-MMT). The state of dispersion of the clay crystals in the thermoplastic polyurethane elastomer (TPU) matrix was studied by X-ray diffraction and transmission electron microscopy (TEM). The phase-separated morphology of the TPU was revealed by high-resolution TEM (HRTEM) and atomic force microscopy (AFM). O-MMT caused a marginal increase in the glass transition temperature of the soft segments of the TPU and this increase is proportional to the amount of O-MMT in the nanocomposites. Differential scanning calorimetry (DSC) was employed to study the effect of O-MMT on the extent of phase separation in the TPU in these nanocomposites. Thermogravimetric analysis (TGA) results indicate a substantial improvement in the thermal stability of TPU by the addition of O-MMT. Tensile strength and elastic modulus are dramatically decreased by the incorporation of O-MMT into TPU, which is due to the hindrance of the phase-separation process by the exfoliated clay-layered crystals.Keywords
This publication has 21 references indexed in Scilit:
- Electrospinning of polyurethane/organically modified montmorillonite nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2005
- Thermoplastic polyurethane nanocomposites of reactive silicate clays: effects of soft segments on propertiesPolymer, 2005
- Characterization of TPU-elastomers by thermal analysis (DSC)Polymer Testing, 2004
- Effect of silica nanoparticles on morphology of segmented polyurethanesPolymer, 2004
- Morphology and properties of thermoplastic polyurethane nanocomposites incorporating hydrophilic layered silicatesPolymer, 2004
- Origin of Multiple Melting Endotherms in a High Hard Block Content Polyurethane. 1. Thermodynamic InvestigationMacromolecules, 2001
- Alteration of polyurea hard domain morphology by diethanol amine (DEOA) in molded flexible polyurethane foamsPolymer, 2000
- Glass Transition Behaviors of a Polyurethane Hard Segment based on 4,4‘-Diisocyanatodiphenylmethane and 1,4-Butanediol and the Calculation of Microdomain CompositionMacromolecules, 1997
- Small‐angle scattering analysis of hard‐microdomain structure and microphase mixing in polyurethane elastomersJournal of Polymer Science: Polymer Physics Edition, 1985
- The structure of MDI/BDO‐based polyurethanes: Diffraction studies on model compounds and oriented thin filmsJournal of Polymer Science: Polymer Physics Edition, 1985