MONITORING SURFACE AND AIRBORNE INORGANIC CONTAMINATION IN THE WORKPLACE BY A FIELD PORTABLE X-RAY FLUORESCENCE SPECTROMETER
Author:
Open Access
- 1 October 1996
- journal article
- research article
- Published by Oxford University Press (OUP) in Annals of Occupational Hygiene
- Vol. 40 (5) , 589-610
Abstract
Assessment of a field-portable energy dispersive X-ray fluorescence spectrometer (PXRFS) was carried out to determine its performance characteristics for direct analysis of surface deposits and airborne inorganic contamination collected on millipore filters. Lower limits of detection (LLDs) determined for 18 elements were found to be below the required sensitivity of analysis, one-tenth of the occupational exposure limit, with the exception of Pb and Cd. Precision of determinations above the LLD indicated that the standard deviation in analysis was less than 10% Results of PXRFS analyses of millipore filters used in sampling airborne contamination agree well with results obtained by a laboratory-based XRF method. Results of monitoring Pb, Cd, As, Hg, Fe, Mn and Ni contamination on workplace surfaces show good correlation between direct monitoring and surface wipe sampling. Levels of contaminants on workplace surfaces were found to vary between 0 and 1200 µg cm−2 on non-textile surfaces; in office areas up to 1458 µg Cd cm−2, 862 µg Pb cm−2 and 46 µg Hg cm−2 were found on carpets. The findings indicate that the portable XRF monitor can provide rapid on-site analyses of surfaces, filters and powders and thus play a key role in a cost-effective sampling and analysis strategy. Copyright © 1996 British Occupational Hygiene Society.Keywords
This publication has 16 references indexed in Scilit:
- Analysis of silicate rocks using field-portable X-ray fluorescence instrumentation incorporating a mercury(II) iodide detector: a preliminary assessment of analytical performanceThe Analyst, 1995
- A semiempirical model for particle deposition onto facial skin and eyes. Role of air currents and electric fieldsJournal of Aerosol Science, 1994
- An Extractive X-Ray Fluorescence Method for Field Screening Lead Paint SitesApplied Occupational and Environmental Hygiene, 1994
- RELEVANCE OF OCCUPATIONAL SKIN EXPOSUREAnnals of Occupational Hygiene, 1993
- ASSESSMENT OF ARSENIC EXPOSURES AND CONTROLS IN GALLIUM ARSENIDE PRODUCTIONAIHA Journal, 1993
- INITIAL EXPERIENCE WITH THE WORKPLACE ANALYSIS SCHEME FOR PROFICIENCY (WASP)Annals of Work Exposures and Health, 1992
- Dermal Measurement and Wipe Sampling Methods: A ReviewApplied Occupational and Environmental Hygiene, 1992
- Investigation of Surface Contamination in a Cadmium Pigment FactoryApplied Occupational and Environmental Hygiene, 1992
- Polycyclic Aromatic Hydrocarbon (PAH) Residues on Skin in Relation to Air Levels among RoofersArchives of Environmental Health: An International Journal, 1989
- Persistently elevated polychlorinated biphenyl levels from residual contamination of workplace surfacesAmerican Journal of Industrial Medicine, 1986