The Influence of Bedding Orientation and Temperature on the Creep Behavior of Opalinus Clay
Open Access
- 18 May 2026
- journal article
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (5)
Abstract
The time dependency of deformation is of critical concern for assessing the integrity of barriers in nuclear waste repositories. Creep, in particular, is a phenomenon recognized for its potential “self‐sealing” properties or, conversely, the potential for delayed failure in the rock mass surrounding an excavation. However, in clay shales, the underlying mechanisms and their stress‐dependency are not yet fully understood. To investigate the creep behavior of clay shales, a series of drained multi‐stage creep tests was performed on pre‐consolidated and saturated specimens of the shaly facies of Opalinus Clay. This study further focuses on the impact of the structural anisotropy by testing specimens loaded parallel or perpendicular to the bedding. The results demonstrate a considerable anisotropic creep behavior concerning both primary and secondary creep. A shift in mechanisms was observed with increasing differential stress, referred to as the long‐term strength, which coincided for both loading configurations. Furthermore, considering the tests performed at both 30 and 60, there was no statistical evidence to suggest that the creep mechanisms were temperature‐dependent.Keywords
This publication has 51 references indexed in Scilit:
- Investigation on anisotropy of mechanical properties of Callovo-Oxfordian claystoneEngineering Geology, 2019
- Hydro-mechanical behaviour of shallow Opalinus Clay shaleEngineering Geology, 2019
- Experimental study of the hydro-mechanical response of Opalinus Clay – Part 1: Pore pressure response and effective geomechanical properties under consideration of confinement and anisotropyEngineering Geology, 2018
- Elastic Anisotropy Reversal During Brittle Creep in ShaleGeophysical Research Letters, 2017
- Effects of deviatoric stress and structural anisotropy on compressive creep behavior of a clayey rockApplied Clay Science, 2015
- Pore morphology and distribution in the Shaly facies of Opalinus Clay (Mont Terri, Switzerland): Insights from representative 2D BIB–SEM investigations on mm to nm scaleApplied Clay Science, 2013
- Experimental study of the hydro-mechanical behaviour of the Callovo-Oxfordian argilliteApplied Clay Science, 2004
- Creep behavior of Bure clayey rockApplied Clay Science, 2004
- Strength anisotropies in mudrocksBulletin of Engineering Geology and the Environment, 2000
- Time-dependent Behavior of Rocks1993