Intake grille design for an embedded ventilation-and-cooling system in an aircraft
Authors:
- 26 February 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 236 (11) , 2352-2365
Abstract
An inlet grille typically needs to be installed at the inlet of the air intake of the ventilation-and-cooling system embedded in airborne electronic equipment to improve pneumatic stealth performance. Here, a typical flying wing model is used as a case study, and a computational fluid dynamics (CFD) simulation is performed. The flow resistance characteristics of the air intake of the opening of the ventilation-and-cooling system on a flat fuselage surface with and without an inlet grille are analyzed at different flow rates and Mach 0.25. The effects of the grille opening shape, diversion angle, thickness, aperture size, and hole shape on the flow resistance characteristics are investigated in detail. The grille is found to effectively guide airflow entry: although the flow resistance at the inlet is increased, the flow resistance at the inlet and outlet of the air intake is significantly reduced. The optimal developments of the outflow and flow resistance characteristics are obtained for a quadrilateral opening. The smaller the diversion angle is, the smoother the airflow entry, and the higher the quality of the internal airflow. The rectification, viscous resistance, and weight exhibit opposing trends with increasing thickness and must be comprehensively considered in designing an optimal scheme. A large-aperture grille ensures good flow patency at low flow rates, whereas a small-aperture grille can reduce flow perturbations and separation at high flow rates by smoothly guiding air into the intake. A grille with round holes has a better spanwise and chordwise balancing effect on the airflow and better flow resistance characteristics than a grille with diamond-shaped holes.Keywords
Funding Information
- Shaanxi Innovative Talents Promotion Plan-Young Science and Technology Star Project (2020KJXX-067)
- Key research & development of Shaanxi Province; Key research & development of Shaanxi Province
- Natural Science Basic Research Program of Shaanxi (2021JQ-084)
- Fundamental Research Funds for the Central Universities (D5000200665, G2020KY05115)
This publication has 14 references indexed in Scilit:
- An optimization study for rotorcraft avionics bay coolingAerospace Science and Technology, 2019
- Heat transfer aspects of regenerative-cooling in methane-based propulsion systemsAerospace Science and Technology, 2018
- Experimental Research on Improving ECM Accuracy and Stability for Diamond-hole GrillesProcedia CIRP, 2018
- Drag reduction performance and mechanism of a thermally conductive elastic wall in internal flowApplied Thermal Engineering, 2017
- Exergy analysis of integrated TEG and regenerative cooling system for power generation from the scramjet cooling heatAerospace Science and Technology, 2017
- Flow field design and process stability in electrochemical machining of diamond holesChinese Journal of Aeronautics, 2016
- Grille design for passenger car to improve aerodynamic and cooling performance using CFD techniqueInternational Journal of Automotive Technology, 2016
- Experimental investigation of aircraft spray cooling system with different heating surfaces and different additivesApplied Thermal Engineering, 2016
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- CFD Analysis of the X-29 Inlet at High Angle of AttackJournal of Aircraft, 1993