Lunar Excavation Experiments in Simulant Soil Test Beds: Revisiting the Surveyor Geotechnical Data
- 1 January 2013
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 26 (1) , 117-133
Abstract
The establishment of permanent bases on planetary surfaces is an important long-term goal of the space community. Understanding the geotechnical properties of planetary surfaces and their interaction with tools and implements will be essential in addressing the challenges of material-handling equipment for infrastructure development during surface missions. With this aim, a replica of the soil mechanics surface sampler, an extendable scoop with a bearing plate attachment, operated on some of the lunar Surveyor missions in the 1960s, was fabricated and used in a series of simulated bearing and excavation tests. Initially, a set of tests was performed on a small laboratory test stand using an acrylic soil bin with a footprint. Subsequent tests were performed in a new large-scale soil bin facility ( ) to minimize wall effects. Both test setups involved the use of JSC-1a lunar simulant soil beds and motorized actuators to drive the scoop into the simulant. Emphasis was placed on methods of repeatable soil bin preparation. The scoop was attached to a commercial six-axis load cell that provided time-resolved measurements of the three-dimensional forces and torques. In addition, simultaneous video provided detailed imaging of the flow behavior and surcharge formation of the regolith during excavation. A surface-profiling technique was developed to resolve the surface deformation as the scoop penetrated and trenched the simulant. Bearing test data in loose bed preparations in both bins compared well with the Surveyor flight data. The data also included the soil response under compacted soil conditions.
Keywords
This publication has 13 references indexed in Scilit:
- Flowability of lunar soil simulant JSC-1aGranular Matter, 2010
- Engineering Properties of Lunar Soil Simulant JSC-1AJournal of Aerospace Engineering, 2010
- Strength Properties of JSC-1A Lunar Regolith SimulantJournal of Geotechnical and Geoenvironmental Engineering, 2009
- Experimental Measurements of Excavation Forces in Lunar Soil Test Beds2008
- An Instantaneous-Profile Laser Scanner to Measure Soil Surface MicrotopographySoil Science Society of America Journal, 2003
- Excavation Forces in Reduced Gravity EnvironmentJournal of Aerospace Engineering, 1997
- Vibratory Excavation and Anchoring Tools for the Lunar Surface1996
- Experimental Studies on Mechanics of Lunar ExcavationJournal of Aerospace Engineering, 1991
- Soil mechanics surface samplerJournal of Geophysical Research, 1969
- Soil mechanics surface sampler experiment for SurveyorJournal of Geophysical Research, 1967