Cascaded “Triple-Bent-Beam” MEMS Sensor for Contactless Temperature Measurements in Nonaccessible Environments
- 20 January 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 60 (4) , 1348-1357
Abstract
A microelectromechanical systems (MEMS) temperature sensor based on a cascade three-stage “bent-beam” structure is described in this paper. A suspended structure mechanically deforms in response to the change in ambient temperature, and then, a displacement is obtained; the structure is composed of three cascaded systems in order to enhance sensor sensitivity. The final conversion is made to an electrical signal that is obtained by using an interdigitated capacitor having one electrode fixed to the substrate and one electrode embedded into the moving tip of the MEMS sensor. The device has been conceived to operate passively in harsh environments where high temperatures could harm active electronic devices. The readout of the unknown temperature is therefore remotely performed by coupling the variable MEMS capacitor to a fixed inductor to compose a resonant LC circuit, which is magnetically coupled to a reader circuit placed outside the environment where the measurement takes place. The temperature to be measured is therefore first converted into a displacement that, in turn, induces a change in a capacitor value; a variation in the resonant frequency of an LC circuit is finally observed through the remote readout circuit. This paper focuses on the analytical and numerical modeling of both the temperature-to-displacement and displacement-to-capacitance conversions, on the design and fabrication of an experimental prototype, on the experimental validation where results are extensively presented and commented, and, finally, on the design of the integrated resonant device for contactless measurements.Keywords
This publication has 14 references indexed in Scilit:
- "Bent beam" MEMS Temperature Sensors for Contactless Measurements in Harsh Environments2008
- Macro-modeling for polysilicon cascaded bent beam electrothermal microactuatorsSensors and Actuators A: Physical, 2006
- Impact Behavior and Energy Transfer Efficiency of Pulse-Driven Bent-Beam Electrothermal ActuatorsJournal of Microelectromechanical Systems, 2006
- Wireless bimorph micro-actuators by pulsed laser heatingSensors and Actuators A: Physical, 2005
- Micro-power wireless transmitter for high-temperature MEMS sensing and communication applications2003
- Measurements of material properties using differential capacitive strain sensorsJournal of Microelectromechanical Systems, 2002
- Wireless micromachined ceramic pressure sensor for high-temperature applicationsJournal of Microelectromechanical Systems, 2002
- Bent-beam electrothermal actuators-Part I: Single beam and cascaded devicesJournal of Microelectromechanical Systems, 2001
- Bent-beam electro-thermal actuators for high force applications1999
- Bent-beam strain sensorsJournal of Microelectromechanical Systems, 1996