Influence of Coupling Effect Between Tension Force and Journal Roundness Error on Dynamic Characteristics of Engine Camshaft Rotor Bearing System
Authors:
- Xun ZhangXZXun Zhang
- Bing LiBLBing Li
- Wubin XuWXWubin Xu
- Yulin ZhangYZYulin Zhang
- Hanyu GuoHGHanyu Guo
Open Access
- 1 January 2026
- journal article
- Published by Wiley in Shock and Vibration
- Vol. 2026 (1)
Abstract
A dynamic model of a multisupported sliding bearing rotor system (exhaust camshaft) incorporating journal roundness error is established based on the Lagrange equation. The Timoshenko beam element is employed to simulate the flexibility of the shaft segment, while the cam unit is simplified using an eccentric mass block and modeled through the concentrated mass method. This study investigates the coupling effect of sprocket tension and journal roundness error on the stiffness and damping characteristics of the system. The stiffness and damping variations across different bearing positions are analyzed. Results indicate that the coupling effect leads to local oil film thickness fluctuations, with the maximum film thickness fluctuation increasing by 15%. Sliding bearings near the sprocket end (e.g., J1 and J2) exhibit increased stiffness and damping due to higher loads, whereas those farther from the sprocket end (e.g., J3–J6) experience relatively minor load fluctuations. Although their vibration amplitudes are larger, their stiffness and damping variations remain limited due to the light load, resulting in a weaker influence of sprocket tension on these bearings. A brief discussion of model credibility, limitations, and a practical path to validation is included.Keywords
Funding Information
- National Natural Science Foundation of China (12362007)
This publication has 15 references indexed in Scilit:
- Numerical and experimental investigation on the performances of a liquid metal bearing with spiral groove structuresTribology International, 2023
- Vibration characteristic analysis of flexible rotor-bearing system subjected to external combined loadsEuropean Journal of Mechanics - A/Solids, 2022
- Effect analysis of rotor balancing under conditions of external forces2021
- Effects of Shaft Shape Errors on the Dynamic Characteristics of a Rotor-Bearing SystemJournal of Tribology, 2019
- Uncertainty analysis of phase and amplitude of harmonic components of bearing inner ring four-point roundness measurementPrecision Engineering, 2018
- Effects of manufacturing errors on the static characteristics of aerostatic journal bearings with porous restrictorTribology International, 2017
- Vibrations of Elliptically Shaped Bearings in Strain Wave GearingsJournal of Vibration and Acoustics, 2016
- Dynamics of a geared parallel-rotor system subjected to changing oil-bearing stiffness due to external loadsFinite Elements in Analysis and Design, 2015
- Nonlinear responses of externally excited rotor bearing systemMATEC Web of Conferences, 2014
- Hydrodynamic lubrication analysis of journal bearing considering misalignment caused by shaft deformationTribology International, 2004