Bench‐scale processing of amaranth seed for oil
Authors:
- 1 December 1995
- journal article
- Published by Wiley in Journal of the American Oil Chemists' Society
- Vol. 72 (12) , 1551-1555
Abstract
Amaranth seed (Amaranthus hypochondriacus cv. K432) was processed to obtain oil, reported to be a promising source of squalene. The amaranth seed was ground using a stone mill, then separated into oil‐rich embryonic tissue (or “bran”) and starchy perisperm. Amaranth bran was much more stable than rice bran when free fatty acid (FFA) content and peroxide value were monitored. Milling at a gap of 0.755 mm did not result in excessive damage to the starch in the perisperm fraction and yielded a bran fraction that contained more than three‐fourths of the oil and a starchy fraction consisting of more than two‐thirds of the seed weight. The bran particles were too fine for effective bench‐scale extraction of the oil. Consequently the bran was extruded into collects prior to extraction. Two extrusion settings were evaluated regarding the rate of moisture injection, while the bran feed rates were constant. There was no significant difference in appearance or size between the two dried collets. Collets were extracted with hexane using an Armfield Extraction/Desolventizing Unit (Model FT 29, Armfield, Ltd., Hampshire, England). Oil recovery averaged 97.7 and 80.0%, respectively. Oil was extracted at high yield from the bran when the bran was extruded into collets. Oil can be obtained as a coproduct of amaranth starch by milling and separating the fractions of amaranth seed. Milling, extrusion, and extraction did not decrease significantly the squalene content in amaranth oil, but increased FFA content and peroxide value and changed tocopherol content of the oil.Keywords
This publication has 2 references indexed in Scilit:
- Extraction and refining of oil from amaranth seedJournal of the American Oil Chemists' Society, 1987
- Mechanical oil extractionJournal of the American Oil Chemists' Society, 1983